Skip to main content
SANtricity commands

Specify AutoSupport HTTP(S) delivery method

Contributors netapp-driley
PDFs

The set storageArray autoSupport deliveryMethod command sets up the delivery method for sending AutoSupport messages to HTTP(S).

Supported Arrays

This command applies to an individual E4000, E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Support Admin role.

Syntax

set storageArray autoSupport deliveryMethod=email mailRelayServer="mail.example.com" senderEmail="sender@example.com"

Parameters

Parameter Description

deliveryMethod

Allows the user to specify the delivery method for AutoSupport collection. Valid choices are:

  • email

  • HTTPS

Note

If the email method is configured, then the AutoSupport OnDemand and Remote Diagnostics will be disabled.

direct

Allows the user to connect directly to the destination technical support systems using the HTTP or HTTPS protocol.

proxyConfigScript

Allows the user to specify the location of a Proxy Auto-Configuration (PAC) script file

proxyServer

Allows the user to specify the HTTP(S) proxy server details required for establishing connection with the destination technical support system.

hostAddress

Allows the user to specify the proxy server's host address. Required if proxyServer is used.

portNumber

Allows the user to specify the proxy server's port number. Required if proxyServer is used.

username

Allows the user to specify the proxy server's username if it is configured.

password

Allows the user to specify the proxy server's password if it is configured.

Minimum Firmware Level

8.40

Examples

SMcli -n Array1 -c "set storageArray autoSupport deliveryMethod=HTTP direct;"

SMcli -n Array1 -c "set storageArray autoSupport deliveryMethod=HTTP
proxyConfigScript=\"http://company.com/~username/proxy.pac\";"

SMcli -n Array1 -c "set storageArray autoSupport deliveryMethod=HTTPS
proxyServer hostAddress=10.117.12.112 portNumber=8080 userName=\"tracyt\" password=\"1234456\";"

SMcli completed successfully.

Verification

Send a test message using the start storageArray autoSupport deliveryTest command to verify that your delivery methods are set up correctly.

Minimum firmware level

8.40