Skip to main content
SANtricity commands

Set Storage Array Host I/O Protocol - SANtricity CLI

Contributors netapp-driley
PDFs

The set storageArray hostIoProtocol command configures the host I/O protocol at the storage array level.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600, EF300, EF50, and EF80 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, EF300, EF50, or EF80 storage array, you must have the Support Admin role.

Syntax

set storageArray hostIoProtocol={"FC" | "ISCSI" | "ISER" | "nvmeIb" | "nvmeFc" | "nvmeRoce" | "SAS" | "SRP"}

Parameter

Parameter Description

set storageArray hostIoProtocol

Allows you to specify which host I/O protocol to use for your storage array. Valid choices are: FC, ISCSI, ISER, nvmeIb, nvmeFc, nvmeRoce, SAS, or SRP.

Minimum firmware level

12.00