Update storage array syslog configuration
Suggest changes
The set storageArray syslog
command allows you to change the syslog server address, protocol, or port number.
Supported Arrays
This command applies to an individual E4000, E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.
Roles
To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Security Admin role.
Syntax
set storageArray syslog id="<id>"
serverAddress="<address>"
port=<port> protocol=("udp" | "tcp" | "tls")
components=(componentName=("auditLog") ...)
Parameters
Parameter | Description |
---|---|
|
Syslog receiver hostname or IP address. |
|
Syslog receiver port number. |
|
Syslog transmission protocol. Acceptable values include UDP, TCP, or TLS. |
|
List of component entries that will be logged to the syslog server. Currently, only audit logs are supported. |
|
Component name; currently only "auditLog" is supported. |
Example
SMcli -n Array1 -c "set storageArray syslog id=\"331998fe-3154-4489-b773-b0bb60c6b48e\" serverAddress=\"192.168.2.1\" port=514 protocol=\"udp\" components=(componentName=\"auditLog\");" ID: 331998fe-3154-4489-b773-b0bb60c6b48e Server Address: 192.168.2.1 Port: 514 Protocol: udp Components 1. Component Name: auditLog SMcli completed successfully.
Minimum firmware level
8.42