Skip to main content
SANtricity commands

Set storage array user session

Contributors
PDFs

The set storageArray userSession command allows you to set a timeout in System Manager, so that users' inactive sessions are disconnected after a specified time.

Supported Arrays

This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Security Admin role.

Context

Use this command to perform one of these operations:

  • Set a timeout in seconds for user sessions. The minimum timeout value is 900 seconds (15 minutes).

  • Turn off session timeouts by setting the value to 0.

Parameters

None.

Syntax

set storageArray userSession sessionTimeout=n

Minimum firmware level

8.41