Skip to main content
SANtricity commands

Show audit log configuration

Contributors netapp-driley
PDFs

The show auditLog configuration command shows the audit log configuration settings for the storage array.

Supported Arrays

This command applies to an individual E4000, E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Security Admin role.

Syntax

show auditLog configuration

Parameters

None.

Examples

SMcli -n Array1 -c "show auditLog configuration;"

Logging level: All
Full policy: Overwrite
Maximum records: 30,000 count
Warning threshold: 90 percent

SMcli completed successfully.

Minimum firmware level

8.40