Skip to main content
SANtricity commands

Show replaceable drives

Contributors netapp-driley

The show replaceableDrives command shows all replaceable drives in a storage array.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

Context

For each replaceable drive in the storage array, this command returns the following information:

  • The tray location and the slot location

  • The volume group name to which the drive belongs

  • The World Wide Name (WWN)

  • The status of the drive

Syntax

show replaceableDrives

Example output

Replaceable drive at Tray 0, Slot 3
                Volume group: 2
                World-wide name: 5000c50028785aff0000000000000000
                Status: Removed
Replaceable drive at Tray 0, Slot 23
                Volume group: 2
                World-wide name: 5000c500095d46df0000000000000000
                Status: Removed
Replaceable drive at Tray 0, Slot 24
                Volume group: 2
                World-wide name: 5000c500287854d70000000000000000
                Status: Removed

Minimum firmware level

7.10