Skip to main content
SANtricity commands

Show Storage Array Host I/O Protocol Information - SANtricity CLI

Contributors netapp-driley
PDFs

The show storageArray hostIoProtocolInformation command displays information about the I/O protocol settings for a specific storage array.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600, EF300, EF50, and EF80 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, EF300, EF50, or EF80 storage array, you must have the Support Admin role.

Syntax

show storageArray hostIoProtocolInfo;

Parameter

None.

Minimum firmware level

12.00