Skip to main content
SANtricity commands

Show storage array DBM database

Contributors

The show storageArray dbmDatabase command retrieves and shows metadata for the on-board backup locations of a storage array. When there are multiple backup locations, metadata is shown for each location.

Supported Arrays

This command applies to any individual storage array, including the E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Storage Monitor role.

Syntax

show storageArray dbmDatabase

Parameters

None.

Notes

This command returns the configuration database information in a format similar to this example.

Configuration Database MetadataLast Host Backup: <date stamp>

CTL LOCATION REVISION ID GEN NUMBER STATUS ACCESS MODE

A

Cache

X.Y

999999

999999

R/W

Optimal

B

Cache

X.Y

999999

999999

R/W

Optimal

N/A

Disk

X.Y

999999

999999

R/W

Optimal

Minimum firmware level

7.83