Skip to main content
SANtricity commands

Show certificate revocation check settings

Contributors netapp-driley
PDFs

The show storageArray revocationCheckSettings command allows you to view the certificate revocation settings for the storage array.

Supported Arrays

This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Security Admin role.

Parameters

None.

Syntax

show storageArray revocationCheckSettings

Example

SMcli -n Array1 c "show storageArray revocationCheckSettings;"
Revocation Checking: Disabled
OCSP Responder Server URL: https://ocspResponderURL.com
SMcli completed successfully.

Minimum firmware level

8.42