Skip to main content
SANtricity commands

Test email alert configuration

Contributors
PDFs

The start emailAlert test command allows you to test the alert configuration by sending a sample email message.

Supported Arrays

This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Support Admin role.

Syntax

start emailAlert test

Parameters

None.

Examples

SMcli -n Array1 -c "start emailAlert test;"

The sample alert message was successfully sent to the email addresses.

SMcli completed successfully.

Minimum firmware level

8.40