Skip to main content
SANtricity commands

Start storage array locate

Contributors netapp-driley
PDFs

The start storageArray locate command locates a storage array by turning on the indicator lights for the storage array.

Supported Arrays

This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.

Roles

To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.

Context

Use the stop storageArray locate command to turn off the indicator lights for the storage array.

Syntax

start storageArray locate

Parameters

None.

Minimum firmware level

6.10