Skip to main content
SANtricity commands

Test syslog configuration

Contributors
PDFs

The start syslog test command sends a sample message to test the syslog configuration.

Supported Arrays

This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Support Admin role.

Syntax

start syslog test

Parameters

None.

Examples

SMcli -n Array1 -c "start syslog test;"

The sample alert message was successfully sent to the syslog servers.

SMcli completed successfully.

Minimum firmware level

8.40