Stop disk pool locate
Suggest changes
The stop diskPool locate
command turns off the indicator lights on the drives that were turned on by the start diskPool locate
command.
Supported Arrays
This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.
Roles
To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.
Syntax
stop diskPool locate
Parameters
None.
Minimum firmware level
7.83