Stop drive locate
Suggest changes
The stop drive locate
command turns off the indicator light on the drive that was turned on by the start drive locate
command.
Supported Arrays
This command applies to any individual storage array, including the E4000, E2700, E5600, E2800, E5700, EF600 and EF300 arrays, as long as all SMcli packages are installed.
Roles
To execute this command on an E4000, E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin role.
Syntax
stop drive locate
Parameters
None.
Minimum firmware level
6.10