Skip to main content
SANtricity 11.5
A newer release of this product is available.

Configure iSER over InfiniBand ports

Contributors

If your controller includes an iSER over InfiniBand port, you can configure the network connection to the host. The configuration settings are available from the Hardware page or the System page.

Before you begin
  • Your controller must include an iSER over InfiniBand port; otherwise, the iSER over InfiniBand settings are not available in System Manager.

  • You must know the IP address of the host connection.

About this task

You can access the iSER over InfiniBand configuration from the Hardware page or from Settings  System. This task describes how to configure the ports from the Hardware page.

Note

The iSER over InfiniBand settings and functions appear only if your storage array's controller includes an iSER over InfiniBand port.

Steps
  1. Select Hardware.

  2. If the graphic shows the drives, click Show back of shelf.

    The graphic changes to show the controllers instead of the drives.

  3. Click the controller with the iSER over InfiniBand port you want to configure.

    The controller's context menu appears.

  4. Select Configure iSER over InfiniBand ports.

    The Configure iSER over InfiniBand Ports dialog box opens.

  5. In the drop-down list, select the HIC port you want to configure, and then enter the IP address of the host.

  6. Click Configure.

  7. Complete the configuration, and then reset the iSER over InfiniBand port by clicking Yes.