Skip to main content
SANtricity 11.6
A newer release of this product is available.

Import system settings

Contributors

You can import the system configuration from one storage array to other storage arrays. This batch operation saves time when you need to configure multiple arrays in the network.

Before you begin
  • System settings are configured in SANtricity System Manager for the storage array you want to use as the source.

  • The existing configuration for the target storage arrays are backed up in SANtricity System Manager (Settings  System  Save Storage Array Configuration).

About this task

Imported settings include media scan settings for a volume, SSD settings for controllers, and automatic load balancing (does not include host connectivity reporting).

Steps
  1. From the Manage page, click Import Settings.

    The Import Settings wizard opens.

  2. In the Select Settings dialog, select System and then click Next.

    A dialog box opens for selecting the source array.

  3. In the Select Source dialog, select the array with the settings you want to import, and then click Next.

  4. In the Select Targets dialog, select one or more arrays to receive the new settings.

    Note

    Storage arrays with firmware below 8.50 are not available for selection. In addition, an array does not appear in this dialog if Unified Manager cannot communicate with that array (for example, if it is offline or if it has certificate, password, or networking problems).

  5. Click Finish.

    The Operations page displays the results of the import operation. If the operation fails, you can click on its row to see more information.

Results

The target storage arrays are now configured with the same system settings as the source array.