Skip to main content
E-Series Systems

Verify storage access on the host

Contributors netapp-driley NetAppZacharyWambold netapp-jolieg
PDFs

Before using the namespace, verify that the host can write data to the namespace and read it back.

Before you begin

Make sure you have the following:

  • An initialized namespace that is formatted with a file system.

Steps

  1. On the host, copy one or more files to the mount point of the disk.

  2. Copy the files back to a different folder on the original disk.

  3. Run the diff command to compare the copied files to the originals.

After you finish

You remove the file and folder that you copied.