Requirements for E2800 canister replacement

02/10/2022 Contributors

PDFs

Before you replace a canister in an E2800 array, review the canister types and requirements.

Canister types include power supplies, power canisters, and fan canisters.

Power supply

The power supply replacement procedure is applicable for IOM replacements. To replace your IOM perform the power supply replacement procedure.

Each 12-drive or 24-drive controller shelf or drive shelf includes two power supplies with integrated fans. These are referred to as power-fan canisters in SANtricity System Manager. If a power-fan canister fails, you must replace it as soon as possible to ensure that the shelf has a redundant power source and adequate cooling.

Shelf types for a power supply

You can replace a power supply in the following shelves:

E2812 controller shelf
E2824 controller shelf
EF280 flash array
DE212C drive shelf
DE224C drive shelf

The following figure shows an example E2812 controller shelf, E2824 controller shelf, and EF280 flash array with two power supplies (power-fan canisters). The DE212C and DE224C drive shelves are identical, but they include I/O modules (IOMs) instead of controller canisters.

(1) Controller shelf with two power supplies (power-fan canisters) below the controller canisters

The procedure for replacing a power supply does not describe how to replace a failed power-fan canister in a DE1600 or DE5600 drive tray, which might be connected to the E5700 or E2800 controller shelves. For instructions for those drive tray models, refer to Replacing a Power-Fan Canister in the DE1600 Drive Tray or the DE5600 Drive Tray.

Requirements for replacing a power supply

If you plan to replace a power supply, keep the following requirements in mind.

You must have a replacement power supply (power-fan canister) that is supported for your controller shelf or drive shelf model.
You have an ESD wristband, or you have taken other antistatic precautions.

You can replace a power supply (power-fan canister) while your storage array is powered on and performing host I/O operations, as long as the following conditions are true:

The second power supply (power-fan canister) in the shelf has an Optimal status.

The OK to remove field in the Details area of the Recovery Guru in SANtricity System Manager displays Yes, indicating that it is safe to remove this component.

If the second power supply (power-fan canister) in the shelf does not have Optimal status or if the Recovery Guru indicates that it is not OK to remove the power-fan canister, contact technical support.

Power canister

Each 60-drive controller shelf or drive shelf includes two power canisters for power redundancy.

Shelf types for a power canister

You can replace a power canister in the following shelves:

E2860 controller shelves
DE460C drive shelf

The procedure for replacing a power canister does not describe how to replace a failed power canister in a DE6600 drive tray, which might be connected to the controller shelf.

The following figure shows the back of a DE460C drive shelf with the two power canisters:

28 dwg de460c rear no callouts maint e2800

The following figure shows a power canister:

Requirements for replacing a power canister

If you plan to replace a power canister, keep the following requirements in mind.

You have a replacement power canister that is supported for your controller shelf or drive shelf model.
You have one power canister that is installed and running.
You have an ESD wristband, or you have taken other antistatic precautions.
You can replace a power canister while your storage array is powered on and performing host I/O operations, as long as the following conditions are true:
- The other power canister in the shelf has Optimal status.
  
  While you perform the procedure, the other power canister supplies power to both fans to ensure that the equipment does not overheat.
- The OK to remove field in the Details area of the Recovery Guru in SANtricity System Manager displays Yes, indicating that it is safe to remove this component.
  
  If the second power canister in the shelf does not have Optimal status or if the Recovery Guru indicates that it is not OK to remove the power canister, contact technical support.

Fan canister

Each 60-drive controller shelf or drive shelf includes two fan canisters.

Shelf types for a fan canister

You can replace a fan canister in the following shelves:

E2860 controller shelves
DE460C drive shelf

The procedure for replacing a fan canister does not describe how to replace a failed fan canister in a DE6600 drive tray, which might be connected to the controller shelf.

The following figure shows a fan canister:

28 dwg e2860 de460c single fan canister no callouts maint e2800

The following figure shows the back of a DE460C shelf with two fan canisters:

Possible equipment damage — If you replace a fan canister with the power turned on, you must complete the replacement procedure within 30 minutes to prevent the possibility of overheating the equipment.

Requirements for replacing a fan canister

If you plan to replace a fan canister, keep the following requirements in mind.

You have a replacement fan canister (fan) that is supported for your controller shelf or drive shelf model.
You have one fan canister that is installed and running.
You have an ESD wristband, or you have taken other antistatic precautions.
If you perform this procedure with the power turned on, you must complete it within 30 minutes to prevent the possibility of overheating the equipment.
You can replace a fan canister while your storage array is powered on and performing host I/O operations, as long as the following conditions are true:
- The second fan canister in the shelf has an Optimal status.
- The OK to remove field in the Details area of the Recovery Guru in SANtricity System Manager displays Yes, indicating that it is safe to remove this component.
  
  If the second fan canister in the shelf does not have Optimal status or if the Recovery Guru indicates that it is not OK to remove the fan canister, contact technical support.