Skip to main content
OnCommand Unified Manager 9.5
A newer release of this product is available.

Aggregate Capacity and Utilization report

Contributors netapp-adityaw
PDFs

The Aggregate Capacity and Utilization report enables you to view information about the capacity and utilization of aggregates in a cluster. This information enables you to understand possible capacity risks and also to view the configured, used, and unused capacity of aggregates.

Aggregate Capacity and Utilization report tabular view

  • Cluster

    Displays the cluster name.

  • HA Pair

    Displays the HA pair value obtained by forming two nodes.

  • Aggregate

    Displays the aggregate name.

  • Total Data Capacity (GB)

    Displays the total data capacity (used plus available).

  • Used Data Capacity (GB)

    Displays the used data capacity.

  • Used Data %

    Displays the used data capacity as a percentage.

  • Available Data Capacity (GB)

    Displays the available data capacity.

  • Available Data %

    Displays the available data capacity as a percentage.

  • Daily Growth Rate %

    Displays the growth rate that occurs every 24 hours in the volume.

  • Days To Full

    Displays the estimated number of days remaining before the aggregate reaches full capacity.

  • Space Full Threshold

    Displays the percentage at which an aggregate is full.

  • Space Nearly Full Threshold

    Displays the percentage at which an aggregate is nearly full.

  • Growth Rate Threshold

    Specifies the aggregate's growth rate is considered to be normal before the system generates an Aggregate Growth Rate Abnormal event.

  • Growth Rate Sensitivity Threshold

    Specifies the factor that is applied to the standard deviation of a volume's growth rate. If the growth rate exceeds the factored standard deviation, a Volume Growth Rate Abnormal event is generated.

  • Days Until Full Threshold

    Specifies the number of days remaining before the aggregate reaches full capacity.

  • Snapshot Reserve Total Capacity (GB)

    Displays the total snapshot reserve capacity of the aggregate.

  • Snapshot Reserve Used Capacity (GB)

    Displays the amount of space used by snapshot copies from snapshot reserve.

  • Snapshot Reserve Used %

    Displays the amount of space used by Snapshot copies from snapshot reserve as a percentage.

  • Snapshot Reserve Available Capacity (GB)

    Displays the amount of space available for Snapshot copies.

  • Snapshot Reserve Available %

    Displays the amount of space available for Snapshot copies as a percentage.

  • Snapshot Copies Reserve Full Threshold

    Specifies the percentage at which an aggregate has consumed all its space reserved for Snapshot copies.

  • Overcommitted Capacity %

    Displays the aggregate overcommitment as a percentage.

  • Overcommitted Threshold %

    Displays the percentage at which an aggregate is overcommitted.

  • Nearly Overcommitted Threshold %

    Displays the percentage at which an aggregate is nearly overcommitted.

  • Type

    Displays the aggregate type:

    • HDD

    • Hybrid

      Combines HDDs and SSDs, but Flash Pool has not been enabled.

    • Hybrid (Flash Pool)

      Combines HDDs and SSDs, and Flash Pool has been enabled.

    • SSD

    • SSD (FabricPool)

      Combines SSDs and a cloud tier

    • VMDisk (SDS)

      Virtual disks within a virtual machine

    • VMDisk (FabricPool)

      Combines virtual disks and a cloud tier

    • LUN (FlexArray) For standard disks and SSD disks, this column is blank when the monitored storage system is running an ONTAP version earlier than 8.3.

  • RAID Type

    Displays the RAID configuration type.

  • Aggregate State

    Displays the current state of the aggregate.

  • SnapLock Type

    Indicates whether the aggregate is a SnapLock or non-SnapLock aggregate.

  • Cloud Tier Space Used (GB)

    Displays the amount of data capacity that is currently being used in the cloud tier.

  • Cloud Tier

    Displays the name of the cloud tier when it was created by ONTAP.