Skip to main content
OnCommand Unified Manager 9.5
A newer release of this product is available.

Editing protection relationships from the Protection/Volume Relationships page

Contributors netapp-adityaw

You can edit existing protection relationships to change the maximum transfer rate, the protection policy, or the protection schedule. You might edit a relationship to decrease the bandwidth used for transfers, or to increase the frequency of scheduled transfers because data is changing often.

Before you begin

You must have the OnCommand Administrator or Storage Administrator role.

About this task

The selected volumes must be protection relationship destinations. You cannot edit relationships when source volumes, load-sharing volumes, or volumes that are not the destination of a SnapMirror or SnapVault relationship are selected.

Steps

  1. From the Protection/Volume Relationships page, select in the volumes list one or more volumes in the same SVM for which you want to edit relationship settings, and then select Edit from the toolbar.

    The Edit Relationship dialog box is displayed.

  2. In the Edit Relationship dialog box, edit the maximum transfer rate, protection policy, or protection schedule, as needed.

  3. Click Apply.

    The changes are applied to the selected relationships.