Copy-free transition project planning worksheets
Suggest changes
PDFs
You can use the copy-free transition planning worksheets to record information about node mapping, SVM mapping, volume mapping, and LIFs to transition. The worksheets are useful when creating a transition project by using the 7-Mode Transition Tool. You should be aware of the guidelines for completing the worksheets.
You can follow these guidelines to complete the worksheets:
-
Map each vFiler unit to an SVM.
If there are no vFiler units in the 7-Mode controller, map the controller to a single SVM.
-
Record the 7-Mode volume name and the corresponding Data ONTAP volume name.
The ONTAP volume name might be different from the 7-Mode volume name.
-
Identify the LIFs to be configured on each SVM.
The IP addresses for the LIFs can either be existing on the 7-Mode system or can be new LIFs.
Node mapping
| 7-Mode controller | Mapped cluster node |
|---|---|
SVM and volume mapping
| 7-Mode controller | vFiler unit or controller | Mapped SVM | 7-Mode volume | SVM volume |
|---|---|---|---|---|
LIF mapping (7-Mode IP addresses)
| 7-Mode controller | vFiler unit or controller | Mapped SVM | 7-Mode IP address | Netmask | Default gateway | Home node | Home port |
|---|---|---|---|---|---|---|---|
LIF mapping (new LIFs)
| SVM | New IP address | Netmask | Default gateway | Home node | Home port |
|---|---|---|---|---|---|
Example
The following table shows an example of completed worksheets for a 7-Mode HA pair with the controllers hostA_7mode and hostB_7mode.
Node mapping
| 7-Mode controller | Mapped cluster node |
|---|---|
hostA_7mode |
cluster1_01 |
hostB_7mode |
cluster1_02 |
SVM and volume mapping
| 7-Mode controller | Mapped cluster node | vFiler unit or controller | Mapped SVM | 7-Mode volume | SVM volume |
|---|---|---|---|---|---|
hostA_7mode |
cluster1_01 |
vfilerA |
svm1 |
volA |
volA |
volB |
volB |
||||
vfilerB |
svm2 |
vol1 |
vol_nfs |
||
vol2 |
vol_cifs |
||||
hostB_7mode |
cluster1_02 |
Not applicable |
svm3 |
vol3 |
vol3 |
vol4 |
vol4 |
||||
vol5 |
vol5 |
||||
vol6 |
vol6 |
LIF mapping (7-Mode IP addresses)
| 7-Mode controller | vFiler unit or controller | Mapped SVM | Existing 7-Mode IP | Netmask | Default gateway | Home node | Home port |
|---|---|---|---|---|---|---|---|
hostA_7mode |
vfilerA |
svm1 |
192.0.2.129 |
255.255.255.128 |
192.40.0.1 |
cluster1_01 |
e0a |
192.0.2.135 |
255.255.255.128 |
192.40.0.1 |
cluster1_02 |
e0b |
|||
vfilerB |
svm2 |
- |
|||||
- |
|||||||
hostB_7mode |
Not applicable |
svm3 |
192.0.2.110 |
255.255.255.128 |
192.40.0.1 |
cluster1_01 |
e0c |
192.0.2.111 |
255.255.255.128 |
192.40.0.1 |
cluster1_02 |
e0d |
LIF mapping (new LIFs)
| SVM | New IP address | Netmask | Default gateway | Home node | Home port |
|---|---|---|---|---|---|
svm1 |
- |
||||
- |
|||||
svm2 |
192.0.2.130 |
255.255.255.128 |
192.40.0.1 |
cluster1_01 |
e1c |
192.0.2.131 |
255.255.255.128 |
192.40.0.1 |
cluster1_02 |
e1d |
|
svm3 |
192.0.2.136 |
255.255.255.128 |
192.40.0.1 |
cluster1_01 |
e0c |
192.0.2.137 |
255.255.255.128 |
192.40.0.1 |
cluster1_02 |
e0d |