Skip to main content
ONTAP FLI

Multipath verification for Linux hosts

Contributors

As part of the Foreign LUN Import (FLI) process, you should verify that multipath is configured and functioning correctly on your hosts.

Complete the following steps for Linux hosts.

Step
  1. To verify that DM-MP multipath is configured and functioning correctly on a Linux host, run the following commands:multipath -ll

    mpath2 (360060e801046b96004f2bf4600000012) dm-6 HITACHI,DF600F
    [size=2.0G][features=0][hwhandler=0][rw]
    \_ round-robin 0 [prio=1][active]
     \_ 0:0:1:2 sdg 8:96  [active][ready]
     \_ 1:0:1:2 sdo 8:224 [active][ready]
    \_ round-robin 0 [prio=0][enabled]
     \_ 0:0:0:2 sdc 8:32  [active][ready]
     \_ 1:0:0:2 sdk 8:160 [active][ready]
    mpath1 (360060e801046b96004f2bf4600000011) dm-5 HITACHI,DF600F
    [size=2.0G][features=0][hwhandler=0][rw]
    \_ round-robin 0 [prio=1][active]
     \_ 0:0:0:1 sdb 8:16  [active][ready]
     \_ 1:0:0:1 sdj 8:144 [active][ready]
    \_ round-robin 0 [prio=0][enabled]
     \_ 0:0:1:1 sdf 8:80  [active][ready]
     \_ 1:0:1:1 sdn 8:208 [active][ready]
    mpath0 (360060e801046b96004f2bf4600000010) dm-0 HITACHI,DF600F
    [size=20G][features=0][hwhandler=0][rw]
    \_ round-robin 0 [prio=1][active]
     \_ 0:0:1:0 sde 8:64  [active][ready]
     \_ 1:0:1:0 sdm 8:192 [active][ready]
    \_ round-robin 0 [prio=0][enabled]
     \_ 0:0:0:0 sda 8:0   [active][ready]
     \_ 1:0:0:0 sdi 8:128 [active][ready]
    mpath3 (360060e801046b96004f2bf4600000013) dm-7 HITACHI,DF600F
    [size=3.0G][features=0][hwhandler=0][rw]
    \_ round-robin 0 [prio=1][active]
     \_ 0:0:0:3 sdd 8:48  [active][ready]
     \_ 1:0:0:3 sdl 8:176 [active][ready]
    \_ round-robin 0 [prio=0][enabled]
     \_ 0:0:1:3 sdh 8:112 [active][ready]
     \_ 1:0:1:3 sdp 8:240 [active][ready]
    [root@dm-rx200s6-22 ~]#