Configure host ports and vSwitches
PDF of this doc site
Provision NAS storage
- NFS configuration
- NFS configuration for ESXi using VSC
- SMB/CIFS and NFS multiprotocol configuration
Provision SAN storage
- FC configuration for Red Hat Enterprise Linux
- iSCSI configuration for ESXi using VSC
- iSCSI configuration for Red Hat Enterprise Linux
Data protection and disaster recovery
- Cluster and SVM peering configuration
- Volume disaster recovery
- Cluster administration
Cluster management using System Manager 9.6 and 9.7
- Cluster management using System Manager 9.6 and 9.7
- Provision NAS storage
The ESXi host requires network ports for the NFS connections to the storage cluster.
It is recommended that you use IP Hash as the NIC teaming policy, which requires a single VMkernel port on a single vSwitch.
The host ports and storage cluster ports used for NFS must have IP addresses in the same subnet.
This task lists the high-level steps for configuring the ESXi host. If you require more detailed instructions, see the VMware publication Storage for your version of ESXi.
Log in to the vSphere Client, and then select the ESXi host from the inventory pane.
On the Manage tab, click Networking.
Click Add Networking, and then select VMkernel and Create a vSphere standard switch to create the VMkernel port and vSwitch.
Configure jumbo frames for the vSwitch (MTU size of 9000, if used).