Skip to main content
System Manager Classic

Complete the FC configuration worksheet

Contributors netapp-mwallis

You require FC initiator and target WWPNs and storage configuration information to perform FC configuration tasks.

FC host WWPNs

Port WWPN

Initiator (host) port connected to FC switch 1

Initiator (host) port connected to FC switch 2

FC target WWPNs

You require two FC data LIFs for each node in the cluster. The WWPNs are assigned by ONTAP when you create the LIFs as part of creating the storage virtual machine (SVM).

The figure shows four nodes
LIF WWPN

Node 1 LIF with port connected to FC switch 1

Node 2 LIF with port connected to FC switch 1

Node 3 LIF with port connected to FC switch 1

Node 4 LIF with port connected to FC switch 1

Node 1 LIF with port connected to FC switch 2

Node 2 LIF with port connected to FC switch 2

Node 3 LIF with port connected to FC switch 2

Node 4 LIF with port connected to FC switch 2

Storage configuration

If the aggregate and SVM are already created, record their names here; otherwise, you can create them as required:

Node to own LUN

Aggregate name

SVM name

LUN information

LUN size

LUN name (optional)

LUN description (optional)

SVM information

If you are not using an existing SVM, you require the following information to create a new one:

SVM name

SVM IPspace

Aggregate for SVM root volume

SVM user name (optional)

SVM password (optional)

SVM management LIF (optional)

Subnet:

IP address:

Network mask:

Gateway:

Home node:

Home port: