Cisco Nexus 3132Q-V switches
You can use the Cisco Nexus 3132Q-V switches as cluster switches in your AFF or FAS cluster.
-
You can install NX-OS and reference configuration files (RCFs) on the Cisco Nexus 3132Q-V cluster switch.
-
You can migrate from a two-node switchless cluster environment to a two-node switched environment using Cisco Nexus 3132Q-V cluster switches.
-
You can replace a defective Cisco Nexus 3132Q-V switch in a cluster and download the switch operating system and reference configuration file.
-
You can replace Cisco Nexus 5596, Nexus 5020, or Nexus 5010 cluster switches with Cisco Nexus 3132Q-V switches.
-
You can replace NetApp CN1610 switches with Cisco Nexus 3132Q-V cluster switches.
The following table lists the documentation available for the Cisco Nexus 3132Q-V switches.
Title |
Description |
Describes how to install the pass-through panel in system cabinets where power connectors are at the front of the chassis and power distribution units are located in the rear of the chassis. |
|
Describes how to setup and configure your Cisco Nexus 3132Q-V cluster switches. |
|
Describes how to install NX-OS and reference configuration files (RCFs) on Nexus 3132Q-V cluster switch. |
|
Describes how to migrate from environments that use older Cisco switches to environments that use Cisco 3132Q-V switches. |
|
Describes the procedure to replace a CN1610 switch with a Cisco Nexus 3132Q-V cluster switch. |
|
Describes how to migrate from a two-node switchless cluster environment to a two-node switched environment using Cisco Nexus 3132Q-V cluster switches. |
|
Describes the procedure to replace a defective Cisco Nexus 3132Q-V switch in a cluster and download the switch operating system and reference configuration file. |