Skip to main content

Retire node1

Contributors netapp-pcarriga
PDFs

To retire node1, you resume the automated operation to disable the HA pair with node2 and shut down node1 correctly. Later in the procedure, you remove node1 from the rack or chassis.

Steps

  1. Resume the operation:

    system controller replace resume

  2. Verify that node1 has been halted:

    system controller replace show-details

After you finish

After retiring node1, verify that it‘s powered off and not connected to the network. Leave the old hardware of node1 in this state until you complete the upgrade of both node1 and node2. You can then decommission node1 during Stage 6. Complete the upgrade.