Skip to main content
Upgrade controllers

Check for MetroCluster configuration errors

Contributors netapp-pcarriga
PDFs

You can use the Active IQ Config Advisor tool available from the NetApp Support Site to check for common configuration errors.

If you do not have a MetroCluster configuration, you can skip this section.

About this task

Active IQ Config Advisor is a configuration validation and health check tool. You can deploy it at both secure sites and non-secure sites for data collection and system analysis.

Note Support for Config Advisor is limited, and available only online.

  1. Download the Active IQ Config Advisor tool.

  2. Run Active IQ Config Advisor, reviewing the output and following its recommendations to address any issues.