Skip to main content
Install and maintain

Boot media replacement workflow - AFF A70 and AFF A90

Contributors netapp-jsnyder dougthomp
PDFs

Get started with replacing the boot media in your AFF A70 or AFF A90 storage system by reviewing the replacement requirements, checking encryption status, shutting down the controller, replacing the boot media, booting the recovery image, restoring encryption, and verifying the system functionality.

OneReview requirements to replace the boot media

Review the requirements for replacing the boot media.

TwoCheck encryption key support and status

Determine whether the system has security key manager enabled or encrypted disks.

ThreeShut down the controller

Shut down the controller in your storage system when when you need to replace the boot media.

FourReplace the boot media

Remove the failed boot media from the System Management module and install the replacement boot media, and then transfer an ONTAP image using a USB flash drive.

FiveBoot the recovery image

Boot the ONTAP image from the USB drive, restore the file system, and verify the environmental variables.

SixRestore encryption

Restore the onboard key manager configuration or the external key manager from the ONATP boot menu.

SevenReturn the failed part to NetApp

Return the failed part to NetApp, as described in the RMA instructions shipped with the kit.