Manually assign disks with root-data-data partitioning
For root-data-data partitioning there are four owned entities (the container disk and the three partitions) collectively owned by the HA pair.
Root-data-data partitioning creates one small partition as the root partition and two larger, equally sized partitions for data.
Parameters must be used in the
disk assign command to assign the proper partition of a root-data-data partitioned disk. You cannot use these parameters with disks that are part of a storage pool. The default value is false.
[-data1 [true]]parameter assigns the
data1partition of a root-data1-data2 partitioned disk.
[-data2 [true]]parameter assigns the
data2partition of a root-data1-data2 partitioned disk.
Display the current ownership for the partitioned disk:
storage disk show -disk disk_name -partition-ownership
Set the CLI privilege level to advanced:
set -privilege advanced
Enter the appropriate command, depending on which ownership entity you want to assign ownership for:
If you want to assign ownership for the… Use this command…
storage disk assign -disk disk_name -owner owner_name
storage disk assign -disk disk_name -owner owner_name-data1 true
storage disk assign -disk disk_name -owner owner_name-data2 true
storage disk assign -disk disk_name -owner owner_name -root true
If any of the ownership entities are already owned, then you must include the