Enable SnapMirror on the Element source volume
-
PDF of this doc site
-
Cluster administration
-
Volume administration
-
Logical storage management with the CLI
-
-
NAS storage management
-
Configure NFS with the CLI
-
Manage NFS with the CLI
-
Manage SMB with the CLI
-
Manage file access using SMB
-
-
-
Security and data encryption
-
Data protection and disaster recovery
-
![](https://docs.netapp.com/common/images/pdf-zip.png)
Collection of separate PDF docs
Creating your file...
This may take a few minutes. Thanks for your patience.
Your file is ready
You must enable SnapMirror on the Element source volume before you can create a replication relationship. You can perform this task in the Element software web UI only.
Before you begin
-
You must have enabled SnapMirror on the Element cluster.
-
The volume block size must be 512 bytes.
-
The volume must not be participating in Element remote replication.
-
The volume access type must not be “Replication Target”.
About this task
The procedure below assumes the volume already exists. You can also enable SnapMirror when you create or clone a volume.
Steps
-
Select Management > Volumes.
-
Select the
button for the volume.
-
In the drop-down menu, select Edit.
-
In the Edit Volume dialog, select Enable SnapMirror.
-
Select Save Changes.