Decide whether to use this network management guide

Contributors netapp-barbe Download PDF of this page

This guide describes basic storage network administration for ONTAP 9.8 and later. It shows you how to configure physical and virtual network ports (VLANs and interface groups), how to create LIFs using IPv4 and IPv6, how to manage routing and host-resolution services in clusters, how to use load balancing to optimize network traffic, and how to monitor a cluster using SNMP.

You should use this guide under the following circumstances:

  • You want to understand the range of ONTAP 9.8 network management capabilities.

  • You want to use the CLI, not ONTAP System Manager.

  • You are using ONTAP 9.8 network management capabilities in one of the following scenarios:

    • You are configuring networking on a new system running ONTAP 9.8 or later.

    • You are upgrading to ONTAP 9.8 or later from a system running 9.7 or earlier.

If you are running an ONTAP release earlier than 9.8, you should use the following documentation:

If you want to use ONTAP System Manager to configure the network for ONTAP 9.7 and later, you should choose the following documentation:

If you want to use OnCommand System Manager to configure the network for ONTAP 9.7 and earlier, you should choose the following documentation:

If you require additional configuration or conceptual information, you should choose among the following documentation: