Supported ONTAP revert paths
Suggest changes
PDFs
You can directly revert your ONTAP software to only one release earlier than your current ONTAP version. For example, if you are running 9.15.1, you cannot revert directly to 9.13.1. You must revert to 9.14.1; then perform a separate revert from 9.14.1 to 9.13.1.
Reverting to ONTAP 9.4 or earlier is not supported. You should not revert to unsupported ONTAP versions.
You can use the system image show command to determine the version of ONTAP running on each node.
The following supported revert paths refer only to on-premises ONTAP releases. For information about reverting ONTAP in the cloud, see Reverting or downgrading Cloud Volumes ONTAP.
| You can revert from… | To… |
|---|---|
ONTAP 9.16.1 |
ONTAP 9.15.1 |
ONTAP 9.15.1 |
ONTAP 9.14.1 |
ONTAP 9.14.1 |
ONTAP 9.13.1 |
ONTAP 9.13.1 |
ONTAP 9.12.1 |
ONTAP 9.12.1 |
ONTAP 9.11.1 |
ONTAP 9.11.1 |
ONTAP 9.10.1 |
ONTAP 9.10.1 |
ONTAP 9.9.1 |
ONTAP 9.9.1 |
ONTAP 9.8 |
ONTAP 9.8 |
ONTAP 9.7 |
ONTAP 9.7 |
ONTAP 9.6 |
ONTAP 9.6 |
ONTAP 9.5 |