Skip to main content

Configure a FlexVol volume to automatically delete FlexClone files and FlexClone LUNs

Contributors netapp-ahibbard

You can enable a FlexVol volume to automatically delete FlexClone files and FlexClone LUNs with autodelete enabled when the free space in the volume decreases below a particular threshold.

What you'll need
  • The FlexVol volume must contain FlexClone files and FlexClone LUNs and be online.

  • The FlexVol volume must not be a read-only volume.

Steps
  1. Enable automatic deletion of FlexClone files and FlexClone LUNs in the FlexVol volume by using the volume snapshot autodelete modify command.

    • For the -trigger parameter, you can specify volume or snap_reserve.

    • For the -destroy-list parameter, you must always specify lun_clone,file_clone regardless of whether you want to delete only one type of clone.
      The following example shows how you can enable volume vol1 to trigger the automatic deletion of FlexClone files and FlexClone LUNs for space reclamation until 25% of the volume consists of free space:

      cluster1::> volume snapshot autodelete modify -vserver vs1 -volume vol1 -enabled true -commitment disrupt -trigger volume -target-free-space 25 -destroy-list lun_clone,file_clone
      
      Volume modify successful on volume:vol1
      Note

      While enabling FlexVol volumes for automatic deletion, if you set the value of the -commitment parameter to destroy, all the FlexClone files and FlexClone LUNs with the -autodelete parameter set to true might be deleted when the free space in the volume decreases below the specified threshold value. However, FlexClone files and FlexClone LUNs with the -autodelete parameter set to false will not be deleted.

  2. Verify that automatic deletion of FlexClone files and FlexClone LUNs is enabled in the FlexVol volume by using the volume snapshot autodelete show command.

    The following example shows that volume vol1 is enabled for automatic deletion of FlexClone files and FlexClone LUNs:

    cluster1::> volume snapshot autodelete show -vserver vs1 -volume vol1
    
             Vserver Name: vs1
              Volume Name: vol1
              Enabled: true
               Commitment: disrupt
             Defer Delete: user_created
             Delete Order: oldest_first
      Defer Delete Prefix: (not specified)*
        Target Free Space: 25%
                  Trigger: volume
         Destroy List: lun_clone,file_clone
    Is Constituent Volume: false
  3. Ensure that autodelete is enabled for the FlexClone files and FlexClone LUNs in the volume that you want to delete by performing the following steps:

    1. Enable automatic deletion of a particular FlexClone file or FlexClone LUN by using the volume file clone autodelete command.

      You can force a specific FlexClone file or FlexClone LUN to be automatically deleted by using the volume file clone autodelete command with the -force parameter.

      The following example shows that automatic deletion of the FlexClone LUN lun1_clone contained in volume vol1 is enabled:

      cluster1::> volume file clone autodelete -vserver vs1 -clone-path /vol/vol1/lun1_clone -enabled true

      You can enable autodelete when you create FlexClone files and FlexClone LUNs.

    2. Verify that the FlexClone file or FlexClone LUN is enabled for automatic deletion by using the volume file clone show-autodelete command.

      The following example shows that the FlexClone LUN lun1_clone is enabled for automatic deletion:

      cluster1::> volume file clone show-autodelete -vserver vs1 -clone-path vol/vol1/lun1_clone
      															Vserver Name: vs1
      															Clone Path: vol/vol1/lun1_clone
      															**Autodelete Enabled: true**

    For more information about using the commands, see the respective man pages.