View efficiency operations and status
-
PDF of this doc site
- Cluster administration
-
Volume administration
- Logical storage management with the CLI
-
NAS storage management
- Configure NFS with the CLI
- Manage NFS with the CLI
-
Manage SMB with the CLI
- Manage file access using SMB
- SAN storage management
- Security and data encryption
-
Data protection and disaster recovery
- Data protection with the CLI
Collection of separate PDF docs
Creating your file...
You can view whether deduplication or data compression is enabled on a volume. You can also view the status, state, type of compression, and progress of the efficiency operations on a volume by using the volume efficiency show
command.
View efficiency status
-
View the status of an efficiency operation on a volume:
volume efficiency show
The following command displays the status of an efficiency operation on volume VolA that is assigned the adaptive compression type:
volume efficiency show -instance -vserver vs1 -volume VolA
If the efficiency operation is enabled on volume VolA and the operation is idle, then you can see the following in the system output:
cluster1::> volume efficiency show -vserver vs1 -volume VolA Vserver Name: vs1 Volume Name: VolA Volume Path: /vol/VolA State: Enabled Status: Idle Progress: Idle for 00:03:20
Determine if volumes contain sequentially packed data
You can display a list of volumes that have sequential packing enabled, for instance, when you need to revert to an ONTAP release earlier than 9.13.1. You must be in advanced privilege mode to use this command.
-
Set the privilege level:
set -privilege advanced
-
List volumes that have sequential packing enabled: 'volume efficiency show -extended-auto-adaptive-compression true'