Skip to main content
SANtricity commands
简体中文版经机器翻译而成，仅供参考。如与英语版出现任何冲突，应以英语版为准。

显示AutoSupport 配置

贡献者
PDF

`show storageArray AutoSupport`命令可显示存储阵列的AutoSupport 捆绑包收集设置。

支持的阵列

此命令适用于E4000、E2800、E5700、EF600和EF300存储阵列。

角色

要在E4000、E2800、E5700、EF600或EF300存储阵列上执行此命令、您必须具有存储管理员或支持管理员或存储监控器角色。

环境

此命令的命令输出显示以下配置信息：

  • 此管理域的AutoSupport 功能、AutoSupport OnDemand功能和AutoSupport 远程诊断功能的激活状态

  • 取决于配置的交付方法的交付参数：

    • 传送方法为电子邮件(SMTP)：显示目标电子邮件地址、邮件中继服务器和发件人电子邮件地址

    • 交付方法为HTTP或HTTPS：

      • 直接连接—显示目标IP地址

      • 代理服务器连接—显示主机地址、端口号和身份验证详细信息

      • 自动代理配置脚本(Automatic Proxy Configuration Script、PAC)连接—显示脚本位置

  • AutoSupport 每日和每周首选时间范围

  • 有关ASUP功能、机箱序列号以及配置的每日和每周计划的信息

语法

show storageArray autoSupport

Parameters

无

示例

  SMcli -n Array1 -c "show storageArray autoSupport;"

   The AutoSupport feature is enabled on this storage array.
   The AutoSupport OnDemand feature is enabled on this storage array.
   The AutoSupport Remote Diagnostics feature is enabled on this storage array.

  Delivery Method: Email (SMTP)
    Destination email address: autosupport@netapp.com
    Mail relay server: mail.example.com
    Sender email address: sender@example.com
    Server encryption type: None
    Server port: 25
    Server username:
    Server password: ***
    Dispatch size limit: 5242880

  Delivery Method: Email (SMTP)
    Destination email address: destination1@example.com, destination2@example.com
    Mail relay server: mail.example.com
    Sender email address: sender@example.com
    Server encryption type: None
    Server port: 25
    Server username:
    Server password: ***
    Dispatch size limit: 5242880

  Delivery Method: HTTPS
    Destination IP address: https://support.netapp.com/put/AsupPut/
    Connection: Direct
    Dispatch size limit: 52428800

  Delivery Method: HTTPS
    Destination IP address: https://support.netapp.com/put/AsupPut/
    Connection: Direct
    Dispatch size limit: Unlimited

   The AutoSupport daily schedule preferred time range is from 12:00 AM to 01:00 AM.
   The AutoSupport weekly schedule preferred time range is from 10:00 PM to 11:00 PM on Thursday, Saturday.

   AutoSupport Capable  AutoSupport OnDemand Capable  Chassis Serial Number  Daily Schedule  Weekly Schedule
   Yes (enabled)        Yes                           SX94500434             12:55 AM        10:08 PM on Thursdays

   SMcli completed successfully.

最低固件级别

8.40