简体中文版经机器翻译而成,仅供参考。如与英语版出现任何冲突,应以英语版为准。
显示卷性能统计信息
贡献者
建议更改
`svolume performanceStats`命令可返回有关卷性能的信息。
支持的阵列
此命令适用于任何单个存储阵列、包括E4000、E2700、E5600、E2800、E5700、EF600和EF300阵列、前提是已安装所有SMClu软件包。
角色
要在E4000、E2800、E5700、EF600或EF300存储阵列上执行此命令、您必须具有存储管理员或存储监控角色。
环境
对于存储阵列中的每个卷、此命令将返回以下信息:
-
存储阵列
-
IOS/s总数
-
读取%
-
主读取缓存命中%
-
主写入缓存命中%
-
SSD缓存命中率
-
当前MBs
-
最大MBs/s
-
当前IOS/s
-
最大IOS/s
-
最小IOS/s
-
平均IOS/s
-
最小MBs/s
-
平均MBs /秒
-
当前IO延迟
-
最大IO延迟
-
最小IO延迟
-
平均IO延迟
语法
show (allVolumes | volume ["volumeName"]
volumes ["volumeName1" ... "volumeNameN"]) performanceStats
Parameters
参数 | Description |
---|---|
|
用于返回有关存储阵列中所有卷的性能统计信息的参数。 |
|
要检索其信息的卷的名称。将卷名称括在方括号([])中。如果卷名称包含特殊字符或数字、则必须将名称用双引号("")括在方括号内。 |
|
要检索其信息的多个卷的名称。使用以下规则输入卷的名称:
如果卷名称包含特殊字符或数字、请使用以下规则输入名称:
|
注释:
在运行`show volume performanceStat`命令之前、请运行`set session performanceMonitorInterval`命令和`set session performanceMonitorIterations`命令以定义收集统计信息的频率。
`svolume performanceStat`命令返回卷性能统计信息、如以下示例所示:
Performance Monitor Statistics for Storage Array: Tyler - Date/Time: 11/6/12 10:00: 34 AM - Polling interval in seconds: 5 "Storage Arrays","Total IOs","Read %","Primary Read Cache Hit %", "Primary Write Cache Hit %","SSD Read Cache Hit %","Current MBs/sec", "Maximum MBs/sec","Current IOs/sec","Maximum IOs/sec","Minimum IOs/sec", "Average IOs/sec","Minimum MBs/sec","Average MBs/sec","Current IO Latency", "Maximum IO Latency","Minimum IO Latency","Average IO Latency" "Capture Iteration: 1","","","","","","","","","","","","","","","","","" "Date/Time: 11/6/12 10:00:34 AM","","","","","","","","","","","","","","", "","","""Volume Unnamed","0.0","","0.0","0.0","0.0","0.0","0.0","0.0","0.0","0.0", "0.0","0.0","0.0","0.0","0.0","0.0","0.0"
最低固件级别
6.10