简体中文版经机器翻译而成,仅供参考。如与英语版出现任何冲突,应以英语版为准。
- MetroCluster 文档
- MetroCluster发行说明
-
安装光纤连接的 MetroCluster
- 概述
- 准备 MetroCluster 安装
- 根据您的配置选择正确的安装操作步骤
-
为光纤连接的 MetroCluster 配置布线
- 概述
- 光纤 MetroCluster 配置的组成部分
- 所需的 MetroCluster FC 组件和命名约定
- FC 交换机和 FC-SAS 网桥的配置工作表
- 安装 MetroCluster 组件并为其布线
- 配置 FC 交换机
- 安装 FC-SAS 网桥和 SAS 磁盘架
- 配置硬件,以便在过渡期间共享 Brocade 6510 FC 网络结构
- 在 ONTAP 中配置 MetroCluster 软件
- 在 MetroCluster 配置中使用虚拟 IP 和边界网关协议的注意事项
- 测试 MetroCluster 配置
- 删除 MetroCluster 配置时的注意事项
-
规划并安装使用阵列 LUN 的 MetroCluster 配置
- 规划包含阵列 LUN 的 MetroCluster 配置
- 支持使用阵列 LUN 的 MetroCluster 配置
- 使用阵列 LUN 的 MetroCluster 配置的要求
- 在使用阵列 LUN 的配置中安装 MetroCluster 组件并为其布线
- 使用阵列 LUN 的 MetroCluster 配置中的交换机分区
- 在使用阵列 LUN 的 MetroCluster 配置中设置 ONTAP
- 实施同时包含磁盘和阵列 LUN 的 MetroCluster 配置
- 如何使用 Active IQ Unified Manager 和 ONTAP 系统管理器进行进一步配置和监控
- 在 MetroCluster 配置中使用 ONTAP 时的注意事项
- 从何处查找追加信息
-
安装 MetroCluster IP 配置
- 概述
- 准备 MetroCluster 安装
- 配置 MetroCluster 硬件组件
- 在 ONTAP 中配置 MetroCluster 软件
- 为计划外自动切换配置 ONTAP 调解器服务
- 测试 MetroCluster 配置
- 删除 MetroCluster 配置时的注意事项
- 在 MetroCluster 配置中使用 ONTAP 时的注意事项
- 从何处查找追加信息
-
安装延伸型 MetroCluster 配置
- 概述
- 准备 MetroCluster 安装
- 根据您的配置选择正确的安装操作步骤
- 为双节点 SAS 连接的延伸型 MetroCluster 配置布线
- 为双节点桥接延伸型 MetroCluster 配置布线
- 在 ONTAP 中配置 MetroCluster 软件
- 在 MetroCluster 配置中使用虚拟 IP 和边界网关协议的注意事项
- 测试 MetroCluster 配置
- 使用阵列 LUN 的延伸型 MetroCluster 配置中的连接
- 删除 MetroCluster 配置时的注意事项
- 如何使用 Active IQ Unified Manager 和 ONTAP 系统管理器进行进一步配置和监控
- 在 MetroCluster 配置中使用 ONTAP 时的注意事项
- 从延伸型 MetroCluster 配置过渡到光纤连接的 配置
- 从何处查找追加信息
- 安装和配置 MetroCluster Tiebreaker
- 了解 MetroCluster 数据保护和灾难恢复
- 执行切换,修复和切回
-
维护 MetroCluster 组件
- 准备MetroCluster维护
- MetroCluster FC配置的维护过程
- MetroCluster IP配置的维护过程
- 所有MetroCluster配置的维护过程
-
从 MetroCluster FC 过渡到 MetroCluster IP
- 选择过渡操作步骤
- 无中断地从 MetroCluster FC 过渡到 MetroCluster IP 配置( ONTAP 9.8 及更高版本)
- 从双节点 MetroCluster FC 中断过渡到四节点 MetroCluster IP 配置( ONTAP 9.8 及更高版本)
- 停用存储架时从 MetroCluster FC 中断过渡到 MetroCluster IP ( ONTAP 9.8 及更高版本)
- 当新控制器不支持现有磁盘架时发生中断过渡( ONTAP 9.8 及更高版本)
- 将 FC SAN 工作负载从 MetroCluster FC 移动到 MetroCluster IP 节点
- 将 Linux iSCSI 主机从 MetroCluster FC 移动到 MetroCluster IP 节点
- 从何处查找追加信息
-
升级、刷新或扩展MetroCluster 配置
- 从此处开始—选择您的操作步骤
- 使用"system controller Replace (system controller Replace)"命令通过切换和切回升级四节点MetroCluster IP中的控制器(ONTAP 9.13.1及更高版本)
- 使用切换和切回升级MetroCluster FC中的控制器
- 使用切换和切回(ONTAP 9.10.1或更高版本)升级MetroCluster FC配置中的控制器(AFF A700/FAS9000到AFF A900/FAS9500)
- 使用切换和切回命令使用system controller replace升级四节点MetroCluster FC中的控制器(ONTAP 9.10.1及更高版本)
- 使用切换和切回升级MetroCluster IP中的控制器(ONTAP 9.8及更高版本)
- 使用切换和切回(ONTAP 9.10.1或更高版本)升级MetroCluster IP中的控制器(AFF A700/FAS9000到AFF A900/FAS9500)
- 刷新四节点 MetroCluster FC 配置
- 刷新四节点或八节点MetroCluster IP配置(ONTAP 9.8及更高版本)
-
将双节点 MetroCluster FC 配置扩展为四节点配置
- 概述
- 启用控制台日志记录
- 验证 MetroCluster 配置的状态
- 在将节点添加到MetroCluster配置之前、发送自定义AutoSupport消息
- 在光纤连接的 MetroCluster 配置中添加控制器模块时新控制器端口的分区
- 向每个集群添加一个新控制器模块
- 使用新控制器刷新 MetroCluster 配置
- 在两个控制器模块上启用存储故障转移并启用集群HA
- 重新启动 SVM
- 将四节点 MetroCluster FC 配置扩展为八节点配置
- 扩展MetroCluster IP配置
- 删除灾难恢复组
- 从何处查找追加信息
-
从灾难中恢复
- 灾难恢复工作流
- 发生灾难后执行强制切换
- 选择正确的恢复操作步骤
-
从多控制器或存储故障中恢复
- 开始之前
- 启用控制台日志记录
- 更换硬件并启动新控制器
-
准备在 MetroCluster IP 配置中切回
- 概述
- 在 MetroCluster IP 配置中设置所需的环境变量
- 启动灾难站点上的设备( MetroCluster IP 配置)
- 配置 IP 交换机( MetroCluster IP 配置)
- 验证与远程站点的存储连接( MetroCluster IP 配置)
- 为灾难站点上的池 1 磁盘重新分配磁盘所有权( MetroCluster IP 配置)
- 在 MetroCluster IP 配置中的替代控制器模块上启动到 ONTAP
- 从运行正常的节点还原到灾难站点的连接( MetroCluster IP 配置)
- 验证自动分配或手动分配池 0 驱动器
- 在运行正常的站点上分配池 1 驱动器( MetroCluster IP 配置)
- 删除运行正常的站点所拥有的故障丛( MetroCluster IP 配置)
- 执行聚合修复和还原镜像( MetroCluster IP 配置)
- 准备在 MetroCluster FC 配置中切回
- 在混合配置中准备要切回的节点(过渡期间恢复)
- 完全恢复
- 从非控制器故障中恢复
- 法律声明