Skip to main content
ONTAP MetroCluster
简体中文版经机器翻译而成，仅供参考。如与英语版出现任何冲突，应以英语版为准。

安装或升级到Tieb破碎 机1.4

贡献者
PDF

在主机Linux操作系统上全新安装或升级到Tieb破碎 机1.4、以监控MetroCluster配置。

关于此任务

  • 存储系统必须运行受支持的ONTAP版本。请参见 "软件要求" 表以了解更多详细信息。

  • 您必须已使用安装OpenJDK yum install java-x.x.x-openjdk 命令：TiebreAKER 1.4及更早版本支持JDK 1.8.0 (JRE 8)。

步骤

  1. 下载MetroCluster Tieb破碎 机软件。

    "MetroCluster Tieb破碎 机(下载)—NetApp 支持站点"

  2. 以 root 用户身份登录到主机。

  3. 【安装- Tiebreaker】安装或升级Tiebreaker软件：

    根据您是执行新安装还是升级现有安装、选择正确的操作步骤。

    执行新安装

    1. 通过运行来安装Tieb破碎 机软件：

      rpm -ivh NetApp-MetroCluster-Tiebreaker-Software-1.4-1.x86_64.rpm

      成功安装时，系统将显示以下输出：

      Verifying...                          ################################# [100%]
Preparing...                          ################################# [100%]
Updating / installing...
   1:NetApp-MetroCluster-Tiebreaker-So################################# [100%]
Post installation start Fri Apr  5 02:28:09 EDT 2024
Enter MetroCluster Tiebreaker user password:

Please enter mysql root password when prompted
Enter password:
Synchronizing state of netapp-metrocluster-tiebreaker-software.service with SysV service script with /usr/lib/systemd/systemd-sysv-install.
Executing: /usr/lib/systemd/systemd-sysv-install enable netapp-metrocluster-tiebreaker-software
Created symlink /etc/systemd/system/multi-user.target.wants/netapp-metrocluster-tiebreaker-software.service → /etc/systemd/system/netapp-metrocluster-tiebreaker-software.service.
Attempting to start NetApp MetroCluster Tiebreaker software services
Started NetApp MetroCluster Tiebreaker software services
Enabled autostart of NetApp MetroCluster Tiebreaker software daemon during boot
Created symbolic link for NetApp MetroCluster Tiebreaker software CLI
Post installation end Fri Apr  5 02:28:22 EDT 2024
Successfully installed NetApp MetroCluster Tiebreaker software version 1.4.
    升级现有安装

    1. 升级Tiebreaker软件。

      [root@mcctb ~]# rpm -Uvh NetApp-MetroCluster-Tiebreaker-Software-1.4-1.x86_64.rpm

      成功升级后，系统将显示以下输出：

      Verifying...                          ################################# [100%]
Preparing...                          ################################# [100%]
Upgrading NetApp MetroCluster Tiebreaker software....
Stopping NetApp MetroCluster Tiebreaker software services before upgrade.
Updating / installing...
   1:NetApp-MetroCluster-Tiebreaker-So################################# [ 50%]
Post installation start Mon Apr  8 06:29:51 EDT 2024
Synchronizing state of netapp-metrocluster-tiebreaker-software.service with SysV service script with /usr/lib/systemd/systemd-sysv-install.
Executing: /usr/lib/systemd/systemd-sysv-install enable netapp-metrocluster-tiebreaker-software
Attempting to start NetApp MetroCluster Tiebreaker software services
Started NetApp MetroCluster Tiebreaker software services
Enabled autostart of NetApp MetroCluster Tiebreaker software daemon during boot
Created symbolic link for NetApp MetroCluster Tiebreaker software CLI
Post upgrade end Mon Apr  8 06:29:51 EDT 2024
Successfully upgraded NetApp MetroCluster Tiebreaker software to version 1.4.
Cleaning up / removing...
   2:NetApp-MetroCluster-Tiebreaker-So################################# [100%]
    备注 如果输入的 MySQL root 密码不正确， Tiebreaker 软件会指示已成功安装该密码，但会显示 Access Denied 消息。要解决问题描述问题，您必须使用 rpm -e 命令卸载 Tiebreaker 软件，然后使用正确的 MySQL root 密码重新安装该软件。

  4. 通过打开从Tiebreaker主机到每个节点管理LIF和集群管理LIF的SSH连接、检查Tiebreaker与MetroCluster 软件的连接。

相关信息

"NetApp 支持"