简体中文版经机器翻译而成,仅供参考。如与英语版出现任何冲突,应以英语版为准。

安装 NX-OS 软件

您可以使用此操作步骤 在 Nexus 3132Q-V 集群交换机上安装 NX-OS 软件。

步骤
  1. 将集群交换机连接到管理网络。

  2. 使用 ping 命令验证与托管 NX-OS 软件和 RCF 的服务器的连接。

    此示例验证交换机是否可以通过 IP 地址 172.19.2.1 访问服务器:

    cs2# ping 172.19.2.1
    Pinging 172.19.2.1 with 0 bytes of data:
    
    Reply From 172.19.2.1: icmp_seq = 0. time= 5910 usec.
  3. 将 NX-OS 软件复制到 Nexus 3132Q-V 交换机。

    cs2# copy sftp: bootflash: vrf management
    Enter source filename: /code/nxos.9.3.4.bin
    Enter hostname for the sftp server: 172.19.2.1
    Enter username: user1
    
    Outbound-ReKey for 172.19.2.1:22
    Inbound-ReKey for 172.19.2.1:22
    user1@172.19.2.1's password: xxxxxxxx
    sftp> progress
    Progress meter enabled
    sftp> get   /code/nxos.9.3.4.bin  /bootflash/nxos.9.3.4.bin
    /code/nxos.9.3.4.bin  100% 1261MB   9.3MB/s   02:15
    sftp> exit
    Copy complete, now saving to disk (please wait)...
    Copy complete.
  4. 验证正在运行的 NX-OS 软件版本:

    cs2# show version
    Cisco Nexus Operating System (NX-OS) Software
    TAC support: http://www.cisco.com/tac
    Copyright (C) 2002-2020, Cisco and/or its affiliates.
    All rights reserved.
    The copyrights to certain works contained in this software are
    owned by other third parties and used and distributed under their own
    licenses, such as open source.  This software is provided "as is," and unless
    otherwise stated, there is no warranty, express or implied, including but not
    limited to warranties of merchantability and fitness for a particular purpose.
    Certain components of this software are licensed under
    the GNU General Public License (GPL) version 2.0 or
    GNU General Public License (GPL) version 3.0  or the GNU
    Lesser General Public License (LGPL) Version 2.1 or
    Lesser General Public License (LGPL) Version 2.0.
    A copy of each such license is available at
    http://www.opensource.org/licenses/gpl-2.0.php and
    http://opensource.org/licenses/gpl-3.0.html and
    http://www.opensource.org/licenses/lgpl-2.1.php and
    http://www.gnu.org/licenses/old-licenses/library.txt.
    
    Software
      BIOS: version 04.25
    NXOS: version 9.3(3)
      BIOS compile time:  01/28/2020
      NXOS image file is: bootflash:///nxos.9.3.3.bin
                      NXOS compile time: 12/22/2019 2:00:00 [12/22/2019 14:00:37]
    
    Hardware
      cisco Nexus 3132QV Chassis (Nexus 9000 Series)
      Intel(R) Core(TM) i3- CPU @ 2.50GHz with 16399900 kB of memory.
      Processor Board ID FOxxxxxxx23
    
      Device name: cs2
      bootflash:   15137792 kB
      usb1:               0 kB (expansion flash)
    
    Kernel uptime is 79 day(s), 10 hour(s), 23 minute(s), 53 second(s)
    
    Last reset at 663500 usecs after Mon Nov  2 10:50:33 2020
      Reason: Reset Requested by CLI command reload
      System version: 9.3(3)
      Service:
    
    plugin
      Core Plugin, Ethernet Plugin
    
    Active Package(s):
    cs2#
  5. 安装 NX-OS 映像。

    安装映像文件会导致每次重新启动交换机时加载该映像文件。

    cs2# install all nxos bootflash:nxos.9.3.4.bin
    Installer will perform compatibility check first. Please wait.
    Installer is forced disruptive
    
    Verifying image bootflash:/nxos.9.3.4.bin for boot variable "nxos".
    [] 100% -- SUCCESS
    
    Verifying image type.
    [] 100% -- SUCCESS
    
    Preparing "nxos" version info using image bootflash:/nxos.9.3.4.bin.
    [] 100% -- SUCCESS
    
    Preparing "bios" version info using image bootflash:/nxos.9.3.4.bin.
    [] 100% -- SUCCESS
    
    Performing module support checks.
    [] 100% -- SUCCESS
    
    Notifying services about system upgrade.
    [] 100% -- SUCCESS
    
    
    Compatibility check is done:
    Module  bootable          Impact              Install-type  Reason
    ------- ----------------- ------------------- ------------- ------
         1     yes            disruptive          reset         default upgrade is not hitless
    
    
    Images will be upgraded according to following table:
    Module       Image       Running-Version(pri:alt)                New-Version          Upg-Required
    ------------ ----------- --------------------------------------- -------------------- ------------
         1       nxos        9.3(3)                                  9.3(4)               yes
         1       bios        v04.25(01/28/2020):v04.25(10/18/2016)   v04.25(01/28/2020)   no
    
    
    Switch will be reloaded for disruptive upgrade.
    Do you want to continue with the installation (y/n)?  [n] y
    
    Install is in progress, please wait.
    
    Performing runtime checks.
    [] 100% -- SUCCESS
    
    Setting boot variables.
    [] 100% -- SUCCESS
    
    Performing configuration copy.
    [] 100% -- SUCCESS
    
    Module 1: Refreshing compact flash and upgrading bios/loader/bootrom.
    Warning: please do not remove or power off the module at this time.
    [] 100% -- SUCCESS
    
    
    Finishing the upgrade, switch will reboot in 10 seconds.
    cs2#
  6. 在交换机重新启动后验证 NX-OS 软件的新版本:

    s如何使用版本

    cs2# show version
    Cisco Nexus Operating System (NX-OS) Software
    TAC support: http://www.cisco.com/tac
    Copyright (C) 2002-2020, Cisco and/or its affiliates.
    All rights reserved.
    The copyrights to certain works contained in this software are
    owned by other third parties and used and distributed under their own
    licenses, such as open source.  This software is provided "as is," and unless
    otherwise stated, there is no warranty, express or implied, including but not
    limited to warranties of merchantability and fitness for a particular purpose.
    Certain components of this software are licensed under
    the GNU General Public License (GPL) version 2.0 or
    GNU General Public License (GPL) version 3.0  or the GNU
    Lesser General Public License (LGPL) Version 2.1 or
    Lesser General Public License (LGPL) Version 2.0.
    A copy of each such license is available at
    http://www.opensource.org/licenses/gpl-2.0.php and
    http://opensource.org/licenses/gpl-3.0.html and
    http://www.opensource.org/licenses/lgpl-2.1.php and
    http://www.gnu.org/licenses/old-licenses/library.txt.
    
    Software
      BIOS: version 04.25
    NXOS: version 9.3(4)
      BIOS compile time:  05/22/2019
      NXOS image file is: bootflash:///nxos.9.3.4.bin
      NXOS compile time:  4/28/2020 21:00:00 [04/29/2020 06:28:31]
    
    
    Hardware
      cisco Nexus 3132QV Chassis (Nexus 9000 Series)
      Intel(R) Core(TM) i3- CPU @ 2.50GHz with 16399900 kB of memory.
      Processor Board ID FOxxxxxxx23
    
      Device name: cs2
      bootflash:   15137792 kB
      usb1:               0 kB (expansion flash)
    
    Kernel uptime is 79 day(s), 10 hour(s), 23 minute(s), 53 second(s)
    
    Last reset at 663500 usecs after Mon Nov  2 10:50:33 2020
      Reason: Reset Requested by CLI command reload
      System version: 9.3(4)
      Service:
    
    plugin
      Core Plugin, Ethernet Plugin
    
    Active Package(s):
    
    cs2#