简体中文版经机器翻译而成，仅供参考。如与英语版出现任何冲突，应以英语版为准。

AutoSupport 消息示例

05/03/2022 贡献者

PDF

SnapDrive for UNIX 提供了适用于不同情形的示例。无论您的操作系统如何，所有示例中的 AutoSupport 消息内容都基本相同。

示例：添加新存储系统

以下示例是从名为 ` 的主机发送的消息：` x336-207-58 ：

computerName="x336-207-58"
        eventSource="snapdrive"
        appVersion="5.2 for UNIX"
        eventID="3"
        category="sduvs2 configured"
        subject="host_name=x336-207-58, host_os=Linux, host_os_release=2.6.32-279.el6.x86_64, host_os_version=#1 SMP Wed Jun 13 18:24:36 EDT 2012, No of controller=2, PM/RBAC=native, Host Virtualization=No, Multipath-type=nativempio, Protection Enabled=No, Protocol=fcp

示例：重新启动守护进程

重新启动守护进程时， SnapDrive for UNIX 会向存储系统发送以下 AutoSupport 消息：

computerName="x336-207-58"
        eventSource="snapdrive"
        appVersion="5.2 for UNIX"
        eventID="2"
        category="daemon restarted"
        subject="host_name=x336-207-58, host_os=Linux, host_os_release=2.6.32-279.el6.x86_64, host_os_version=#1 SMP Wed Jun 13 18:24:36 EDT 2012, No of controller=2, PM/RBAC=native, Host Virtualization=No, Multipath-type=nativempio, Protection Enabled=No, Protocol=fcp

如果已配置 dFM 且 RBAC 方法 设置为 dFM ，则 SnapDrive for UNIX 会向存储系统发送以下 AutoSupport 消息：

computerName="x336-207-58"
        eventSource="snapdrive"
        appVersion="5.2 for UNIX"
        eventID="2"
        category="daemon restarted"
        subject="host_name=x336-207-58, host_os=Linux, host_os_release=2.6.32-279.el6.x86_64, host_os_version=#1 SMP Wed Jun 13 18:24:36 EDT 2012, No of controller=2, PM/RBAC=dfm, Host Virtualization=No, Multipath-type=nativempio, Protection Enabled=Yes, Protocol=fcp"

如果配置了 dfm 且将 rbac 方法 设置为原生，则 SnapDrive for UNIX 会向存储系统发送以下 AutoSupport 消息。

computerName="x336-207-58"
        eventSource="snapdrive"
        appVersion="5.2 for UNIX"
        eventID="2"
        category="daemon restarted"
        subject="host_name=x336-207-58, host_os=Linux, host_os_release=2.6.32-279.el6.x86_64, host_os_version=#1 SMP Wed Jun 13 18:24:36 EDT 2012, No of controller=2, PM/RBAC=native, Host Virtualization=No, Multipath-type=nativempio, Protection Enabled=Yes, Protocol=fcp"

当 snap create 操作成功时， SnapDrive for UNIX 会向存储系统发送以下 AutoSupport 消息：

computerName="x336-207-58"
        eventSource="snapdrive"
        appVersion="5.2 for UNIX"
        eventID="5"
        category="snap create successful"
        subject="host_name=x336-207-58, host_os=Linux, host_os_release=2.6.32-279.el6.x86_64, host_os_version=#1 SMP Wed Jun 13 18:24:36 EDT 2012, No of controller=3, PM/RBAC=native, Host Virtualization=No, Multipath-type=nativempio, Protection Enabled=No, Protocol=iscsi, snapshot_name=dg_snap"

如果 storage show all 操作成功，则适用于 UNIX 的 SnapDrive 会向存储系统发送以下 AutoSupport 消息：

computerName="x336-207-58"
        eventSource="snapdrive"
        appVersion="5.2 for UNIX"
        eventID="3"
        category="general"
        subject="protos=fcp, Connect Luns=8, dgs=4, hvs=3, fs=3, host_name=x336-207-58, host_os=Linux, host_os_release=2.6.32-279.el6.x86_64, host_os_version=#1 SMP Wed Jun 13 18:24:36 EDT 2012, No of controller=2, PM/RBAC=native, Host Virtualization=No, Multipath-type=nativempio, Protection Enabled=No, Protocol=fcp"

AutoSupport 消息示例

Creating your file...