Snapdrive for Unix
简体中文版经机器翻译而成,仅供参考。如与英语版出现任何冲突,应以英语版为准。

验证支持的配置

贡献者

您可以通过检查主机系统中的组件(例如,操作系统,主机上安装的软件版本,协议,主机上的文件系统等)以及为 snapdrive.conf 文件中的每个配置参数指定的值来验证 SnapDrive for UNIX 中支持的配置。

  1. 验证支持的配置。

    ` * sdconfcheck check*`

    [root@scspr0023764001 bin]# sdconfcheck check
    
    NOTE: SnapDrive Configuration Checker is using the data file version  v12052013
      Please make sure that you are using the latest version.
      Refer to the SnapDrive for Unix Installation and Administration Guide for more details.
    
    Detected Intel/AMD x64 Architecture
    Detected Linux OS
    Detected sg3_utils 1.28
    Detected Kernel Version 2.6.32-358.el6.x86_64
    Detected LVM_SUPPRESS_FD_WARNINGS has not set
    Detected Multipathing version 0.4.9
    Detected /etc/multipath.conf file not found
    Detected Host OS Red Hat Enterprise Linux 6.0 Update 4
    Detected NFSv3 FileSystem on Linux
    Detected Software iSCSI on Linux
    Detected NFSv4 Filesystem on Linux
    Detected   Ext4 File System
    Detected   Linux Native LVM2
    Detected   Linux Native MPIO
    
    Did not find any supported cluster solutions.
    
    Did not find any supported HU tool kits.
    
    Trace-Enabled: on
    Trace-Level: 7
    
    Supported Configurations on this host by SDU Version 5.2.2
    -------------------------------------------------------------
    Linux NFS Configuration
    [root@scspr0023764001 bin]#

    检查输出中列出的组件,然后安装或配置缺少的组件。