本繁體中文版使用機器翻譯，譯文僅供參考，若與英文版本牴觸，應以英文版本為準。
安裝 ONTAP Mediator 安裝套件
貢獻者
建議變更
PDF
若要安裝 ONTAP Mediator，您必須取得安裝套件並在主機上執行安裝程式。
|
若要升級現有的 ONTAP Mediator 安裝，請改為參閱 "升級 ONTAP 中介器"。 |
關於此任務
-
從 ONTAP 9.19.1 和 ONTAP Mediator 1.12 開始，您可以選擇安裝支援 iSCSI 和 HTTPS 的 ONTAP Mediator，或僅支援 HTTPS 的 ONTAP Mediator。如果您選擇僅安裝支援 HTTPS 的 ONTAP Mediator，則不會安裝 SCST 軟體套件。
-
如果您從安裝了 SCST 的 ONTAP Mediator 1.11 或更早版本升級，並且在升級過程中選擇僅 HTTPS 選項，則 SCST 軟體包將被卸載，新的 ONTAP Mediator 版本將不包含 SCST 軟體包。
-
如果您打算使用 ONTAP Mediator 監控多個 MetroCluster IP 組態，支援取決於您的 Mediator 類型、ONTAP 版本和作業系統。如需詳細資訊，請參閱 "使用 ONTAP Mediator 監控多個 MetroCluster IP 組態"。
-
僅支援 HTTPS 的 ONTAP Mediator 安裝方式適用於下列使用情境：
-
您計劃僅使用 ONTAP Mediator 來監控您的 SnapMirror active sync 叢集。
-
您計劃設定 ONTAP Mediator 與 HTTPS 以監控一個或多個 MetroCluster IP 組態。
-
-
在下列情況下，必須安裝支援 iSCSI 和 HTTPS 的 ONTAP Mediator：
-
您計劃設定 ONTAP Mediator 與 iSCSI 來監控一個或多個 MetroCluster IP 組態。
-
-
在安裝或升級至 ONTAP Mediator 1.12 或更高版本時，安裝程式會提示您回答以下問題：
ONTAP Mediator can be installed with iSCSI and HTTPS support, or HTTPS support only. Do you wish to install ONTAP Mediator with iSCSI and HTTPS support? Y(es)/n(o):-
如果您打算使用已設定了 iSCSI 的 ONTAP Mediator 來監控一個或多個 MetroCluster IP 配置，請回覆
Yes。 -
如果您計劃僅使用 ONTAP Mediator 進行 SnapMirror 主動同步，或計劃使用 HTTPS 設定 ONTAP Mediator 來監控一個或多個 MetroCluster IP 組態，請回應。
No或者，您可以在
./ontap-mediator-1.12.1/ontap-mediator-1.12.1指令中使用--https-only選項來指定僅使用 HTTPS。
-
-
對於自動化使用案例，您可以使用
./ontap-mediator-1.12.1/ontap-mediator-1.12.1 -y命令來跳過安裝程式提示。
步驟
-
執行安裝程式並依要求回應提示：
./ontap-mediator-1.12.1/ontap-mediator-1.12.1[root@mediator_host ~]# ./ontap-mediator-1.12.1/ontap-mediator-1.12.1
若要在安裝期間跳過簽署檢查，請使用
./ontap-mediator-1.12.1/ontap-mediator-1.12.1 --skip-code-signature-check命令安裝程式會建立所需的帳戶並安裝所需的套件。如果已安裝 ONTAP Mediator，安裝程式會提示您進行升級；有關升級的特定步驟和範例，請參閱 "升級 ONTAP 中介器"。
支援 HTTPS 和 iSCSI 的 ONTAP Mediator 安裝範例（主控台輸出）
[root@mediator_host ~]# tar -zxvf ontap-mediator-1.12.1.tgz ontap-mediator-1.12.1/ ontap-mediator-1.12.1/csc-prod-chain-ONTAP-Mediator.pem ontap-mediator-1.12.1/ONTAP-Mediator-production.pub ontap-mediator-1.12.1/tsa-prod-ONTAP-Mediator.pem ontap-mediator-1.12.1/csc-prod-ONTAP-Mediator.pem ontap-mediator-1.12.1/tsa-prod-chain-ONTAP-Mediator.pem ontap-mediator-1.12.1/ontap-mediator-1.12.1 ontap-mediator-1.12.1/ontap-mediator-1.12.1.sig ontap-mediator-1.12.1/ontap-mediator-1.12.1.tsr ontap-mediator-1.12.1/ontap-mediator-1.12.1.sig.tsr [root@mediator_host ~]# ontap-mediator-1.12.1/ontap-mediator-1.12.1 ONTAP Mediator: Self Extracting Installer + Extracting the ONTAP Mediator installation/upgrade archive + Performing the ONTAP Mediator run-time code signature check Using openssl from the path: /usr/bin/openssl configured for CApath:/etc/pki/tls + Unpacking the ONTAP Mediator installer + ONTAP_MEDIATOR_INSTALL_HTTPS_ONLY is set to '0', args are: '' + Starting ONTAP Mediator install/update process: previous installation_mode is '' ONTAP Mediator can be installed with iSCSI and HTTPS support, or support for HTTPS only. Do you wish to install ONTAP Mediator with iSCSI and HTTPS support? Y(es)/n(o): yes ONTAP Mediator will be installed with mode: ISCSI_HTTPS + Selected install package mode: ISCSI_HTTPS + Checking that required ports 3260 and 31784 are free ONTAP Mediator requires two user accounts. One for the service (netapp), and one for use by ONTAP to the mediator API (mediatoradmin). Would you like to use the default account names: netapp + mediatoradmin? (Y(es)/n(o)): yes Enter ONTAP Mediator user account (mediatoradmin) password: Re-Enter ONTAP Mediator user account (mediatoradmin) password: + Checking if SELinux is in enforcing mode SELinux is set to Enforcing. ONTAP Mediator server requires modifying the SELinux context of the file /opt/netapp/lib/ontap_mediator/pyenv/bin/uwsgi from type 'lib_t' to 'bin_t'. This is necessary to start the ONTAP Mediator service while SELinux is set to Enforcing. Allow SELinux context change? Y(es)/n(o): yes The installer will change the SELinux context type of /opt/netapp/lib/ontap_mediator/pyenv/bin/uwsgi from type 'lib_t' to 'bin_t'. + Checking for default Linux firewall + Installing required packages. Last metadata expiration check: 2:16:00 ago on Tue 24 Mar 2026 12:58:28 PM EDT. Package openssl-1:3.5.1-7.0.1.el9_7.x86_64 is already installed. Package openssl-devel-1:3.5.1-7.0.1.el9_7.x86_64 is already installed. Package kernel-uek-devel-6.12.0-109.67.6.el9uek.x86_64 is already installed. Package gcc-11.5.0-11.0.2.el9.x86_64 is already installed. Package make-1:4.3-8.el9.x86_64 is already installed. Package which-2.21-30.el9_6.x86_64 is already installed. Package libselinux-utils-3.6-3.el9.x86_64 is already installed. Package patch-2.7.6-16.el9.x86_64 is already installed. Package perl-Data-Dumper-2.174-462.el9.x86_64 is already installed. Package perl-ExtUtils-MakeMaker-2:7.60-3.el9.noarch is already installed. Package bzip2-1.0.8-10.el9_5.x86_64 is already installed. Package efibootmgr-16-12.0.1.el9.x86_64 is already installed. Package mokutil-2:0.7.2-1.el9.x86_64 is already installed. Package python3-pip-21.3.1-1.el9.noarch is already installed. Package elfutils-libelf-devel-0.193-1.el9.x86_64 is already installed. Package policycoreutils-python-utils-3.6-3.el9.noarch is already installed. Package python3.12-3.12.12-4.0.1.el9_7.1.x86_64 is already installed. Package python3.12-devel-3.12.12-4.0.1.el9_7.1.x86_64 is already installed. Package gcc-toolset-14-14.0-2.el9.x86_64 is already installed. Dependencies resolved. =================================================================================================================================== Package Architecture Version Repository Size =================================================================================================================================== Installing: efibootmgr x86_64 18-8.el10 baseos 47 k mokutil x86_64 2:0.7.2-1.el10 baseos 48 k patch x86_64 2.7.6-26.el10 appstream 131 k perl-ExtUtils-MakeMaker noarch 2:7.70-513.el10 appstream 295 k python3-devel x86_64 3.12.12-4.el10_1 appstream 329 k python3-pip noarch 23.3.2-7.el10 appstream 3.2 M Upgrading: libselinux x86_64 3.9-1.el10 baseos 97 k libselinux-utils x86_64 3.9-1.el10 baseos 122 k libsemanage x86_64 3.9-1.el10 baseos 122 k libsepol x86_64 3.9-1.el10 baseos 348 k policycoreutils x86_64 3.9-1.el10 baseos 224 k policycoreutils-python-utils noarch 3.9-1.el10 appstream 51 k python-unversioned-command noarch 3.12.12-4.el10_1 appstream 11 k python3 x86_64 3.12.12-4.el10_1 baseos 28 k python3-libs x86_64 3.12.12-4.el10_1 baseos 9.4 M python3-libselinux x86_64 3.9-1.el10 appstream 200 k python3-libsemanage x86_64 3.9-1.el10 appstream 81 k python3-policycoreutils noarch 3.9-1.el10 appstream 2.2 M Installing dependencies: annobin-docs noarch 12.99-1.el10 appstream 88 k annobin-plugin-gcc x86_64 12.99-1.el10 appstream 998 k dwz x86_64 0.16-1.el10 appstream 139 k efi-filesystem noarch 6-7.el10.rocky.0.1 baseos 7.8 k efi-srpm-macros noarch 6-7.el10.rocky.0.1 appstream 22 k efivar-libs x86_64 39-3.el10 baseos 127 k fonts-srpm-macros noarch 1:2.0.5-18.el10 appstream 26 k forge-srpm-macros noarch 0.4.0-6.el10 appstream 20 k gcc-plugin-annobin x86_64 14.3.1-2.1.el10 appstream 67 k go-srpm-macros noarch 3.6.0-7.el10_1 appstream 27 k kernel-srpm-macros noarch 1.0-26.el10 appstream 9.4 k lua-srpm-macros noarch 1-15.el10 appstream 8.8 k ocaml-srpm-macros noarch 10-4.el10 appstream 9.2 k openblas-srpm-macros noarch 2-19.el10 appstream 7.7 k package-notes-srpm-macros noarch 0.5-13.el10 appstream 9.2 k perl-AutoSplit noarch 5.74-512.2.el10_0 appstream 21 k perl-Benchmark noarch 1.25-512.2.el10_0 appstream 27 k perl-CPAN-Meta-Requirements noarch 2.143-11.el10 appstream 35 k perl-CPAN-Meta-YAML noarch 0.018-512.el10 appstream 26 k perl-Devel-PPPort x86_64 3.72-512.el10 appstream 219 k perl-ExtUtils-Command noarch 2:7.70-513.el10 appstream 14 k perl-ExtUtils-Constant noarch 0.25-512.2.el10_0 appstream 43 k perl-ExtUtils-Install noarch 2.22-511.el10 appstream 43 k perl-ExtUtils-Manifest noarch 1:1.75-511.el10 appstream 34 k perl-ExtUtils-ParseXS noarch 1:3.51-512.el10 appstream 189 k perl-File-Compare noarch 1.100.800-512.2.el10_0 appstream 13 k perl-File-Copy noarch 2.41-512.2.el10_0 appstream 20 k perl-I18N-Langinfo x86_64 0.24-512.2.el10_0 appstream 25 k perl-JSON-PP noarch 1:4.16-512.el10 appstream 66 k perl-Test-Harness noarch 1:3.48-512.el10 appstream 282 k perl-lib x86_64 0.65-512.2.el10_0 appstream 15 k perl-srpm-macros noarch 1-57.el10 appstream 8.5 k perl-version x86_64 8:0.99.32-4.el10 appstream 63 k pyproject-srpm-macros noarch 1.16.2-1.el10 appstream 14 k python-srpm-macros noarch 3.12-10.el10 appstream 23 k python3-pyparsing noarch 3.1.1-7.el10 baseos 271 k qt6-srpm-macros noarch 6.9.1-1.el10 appstream 9.6 k redhat-rpm-config noarch 293-1.el10.rocky.0.2 appstream 78 k rust-toolset-srpm-macros noarch 1.88.0-1.el10 appstream 12 k systemtap-sdt-devel x86_64 5.3-3b.el10 appstream 69 k systemtap-sdt-dtrace x86_64 5.3-3b.el10 appstream 70 k Installing weak dependencies: perl-CPAN-Meta noarch 2.150010-511.el10 appstream 197 k perl-Encode-Locale noarch 1.05-31.el10 appstream 18 k perl-Time-HiRes x86_64 4:1.9777-511.el10 appstream 58 k perl-devel x86_64 4:5.40.2-512.2.el10_0 appstream 770 k perl-doc noarch 5.40.2-512.2.el10_0 appstream 4.9 M Transaction Summary =================================================================================================================================== Install 52 Packages Upgrade 12 Packages Total download size: 26 M Is this ok [y/N]: y Downloading Packages: (1/64): efi-filesystem-6-7.el10.rocky.0.1.noarch.rpm 206 kB/s | 7.8 kB 00:00 (2/64): efibootmgr-18-8.el10.x86_64.rpm 1.2 MB/s | 47 kB 00:00 (3/64): efivar-libs-39-3.el10.x86_64.rpm 2.8 MB/s | 127 kB 00:00 (4/64): mokutil-0.7.2-1.el10.x86_64.rpm 6.4 MB/s | 48 kB 00:00 (5/64): annobin-docs-12.99-1.el10.noarch.rpm 11 MB/s | 88 kB 00:00 (6/64): python3-pyparsing-3.1.1-7.el10.noarch.rpm 13 MB/s | 271 kB 00:00 (7/64): dwz-0.16-1.el10.x86_64.rpm 12 MB/s | 139 kB 00:00 (8/64): efi-srpm-macros-6-7.el10.rocky.0.1.noarch.rpm 2.7 MB/s | 22 kB 00:00 (9/64): fonts-srpm-macros-2.0.5-18.el10.noarch.rpm 5.1 MB/s | 26 kB 00:00 (10/64): forge-srpm-macros-0.4.0-6.el10.noarch.rpm 4.3 MB/s | 20 kB 00:00 (11/64): gcc-plugin-annobin-14.3.1-2.1.el10.x86_64.rpm 10 MB/s | 67 kB 00:00 (12/64): go-srpm-macros-3.6.0-7.el10_1.noarch.rpm 4.7 MB/s | 27 kB 00:00 (13/64): kernel-srpm-macros-1.0-26.el10.noarch.rpm 2.0 MB/s | 9.4 kB 00:00 (14/64): lua-srpm-macros-1-15.el10.noarch.rpm 2.0 MB/s | 8.8 kB 00:00 (15/64): ocaml-srpm-macros-10-4.el10.noarch.rpm 2.0 MB/s | 9.2 kB 00:00 (16/64): annobin-plugin-gcc-12.99-1.el10.x86_64.rpm 16 MB/s | 998 kB 00:00 (17/64): openblas-srpm-macros-2-19.el10.noarch.rpm 432 kB/s | 7.7 kB 00:00 (18/64): package-notes-srpm-macros-0.5-13.el10.noarch.rpm 519 kB/s | 9.2 kB 00:00 (19/64): perl-AutoSplit-5.74-512.2.el10_0.noarch.rpm 4.5 MB/s | 21 kB 00:00 (20/64): patch-2.7.6-26.el10.x86_64.rpm 14 MB/s | 131 kB 00:00 (21/64): perl-Benchmark-1.25-512.2.el10_0.noarch.rpm 3.5 MB/s | 27 kB 00:00 (22/64): perl-CPAN-Meta-Requirements-2.143-11.el10.noarch.rpm 10 MB/s | 35 kB 00:00 (23/64): perl-CPAN-Meta-YAML-0.018-512.el10.noarch.rpm 5.3 MB/s | 26 kB 00:00 (24/64): perl-CPAN-Meta-2.150010-511.el10.noarch.rpm 12 MB/s | 197 kB 00:00 (25/64): perl-Encode-Locale-1.05-31.el10.noarch.rpm 2.6 MB/s | 18 kB 00:00 (26/64): perl-ExtUtils-Command-7.70-513.el10.noarch.rpm 3.0 MB/s | 14 kB 00:00 (27/64): perl-Devel-PPPort-3.72-512.el10.x86_64.rpm 13 MB/s | 219 kB 00:00 (28/64): perl-ExtUtils-Constant-0.25-512.2.el10_0.noarch.rpm 4.9 MB/s | 43 kB 00:00 (29/64): perl-ExtUtils-Install-2.22-511.el10.noarch.rpm 4.7 MB/s | 43 kB 00:00 (30/64): perl-ExtUtils-Manifest-1.75-511.el10.noarch.rpm 6.2 MB/s | 34 kB 00:00 (31/64): perl-File-Compare-1.100.800-512.2.el10_0.noarch.rpm 4.2 MB/s | 13 kB 00:00 (32/64): perl-ExtUtils-MakeMaker-7.70-513.el10.noarch.rpm 17 MB/s | 295 kB 00:00 (33/64): perl-ExtUtils-ParseXS-3.51-512.el10.noarch.rpm 11 MB/s | 189 kB 00:00 (34/64): perl-File-Copy-2.41-512.2.el10_0.noarch.rpm 1.7 MB/s | 20 kB 00:00 (35/64): perl-I18N-Langinfo-0.24-512.2.el10_0.x86_64.rpm 5.0 MB/s | 25 kB 00:00 (36/64): perl-JSON-PP-4.16-512.el10.noarch.rpm 9.3 MB/s | 66 kB 00:00 (37/64): perl-Time-HiRes-1.9777-511.el10.x86_64.rpm 11 MB/s | 58 kB 00:00 (38/64): perl-Test-Harness-3.48-512.el10.noarch.rpm 13 MB/s | 282 kB 00:00 (39/64): perl-lib-0.65-512.2.el10_0.x86_64.rpm 4.4 MB/s | 15 kB 00:00 (40/64): perl-srpm-macros-1-57.el10.noarch.rpm 2.7 MB/s | 8.5 kB 00:00 (41/64): perl-devel-5.40.2-512.2.el10_0.x86_64.rpm 19 MB/s | 770 kB 00:00 (42/64): perl-version-0.99.32-4.el10.x86_64.rpm 4.3 MB/s | 63 kB 00:00 (43/64): pyproject-srpm-macros-1.16.2-1.el10.noarch.rpm 4.5 MB/s | 14 kB 00:00 (44/64): python-srpm-macros-3.12-10.el10.noarch.rpm 5.1 MB/s | 23 kB 00:00 (45/64): python3-devel-3.12.12-4.el10_1.x86_64.rpm 20 MB/s | 329 kB 00:00 (46/64): qt6-srpm-macros-6.9.1-1.el10.noarch.rpm 3.0 MB/s | 9.6 kB 00:00 (47/64): redhat-rpm-config-293-1.el10.rocky.0.2.noarch.rpm 16 MB/s | 78 kB 00:00 (48/64): rust-toolset-srpm-macros-1.88.0-1.el10.noarch.rpm 3.6 MB/s | 12 kB 00:00 (49/64): systemtap-sdt-devel-5.3-3b.el10.x86_64.rpm 11 MB/s | 69 kB 00:00 (50/64): systemtap-sdt-dtrace-5.3-3b.el10.x86_64.rpm 16 MB/s | 70 kB 00:00 (51/64): libselinux-3.9-1.el10.x86_64.rpm 10 MB/s | 97 kB 00:00 (52/64): libselinux-utils-3.9-1.el10.x86_64.rpm 14 MB/s | 122 kB 00:00 (53/64): libsemanage-3.9-1.el10.x86_64.rpm 13 MB/s | 122 kB 00:00 (54/64): libsepol-3.9-1.el10.x86_64.rpm 18 MB/s | 348 kB 00:00 (55/64): python3-pip-23.3.2-7.el10.noarch.rpm 21 MB/s | 3.2 MB 00:00 (56/64): policycoreutils-3.9-1.el10.x86_64.rpm 4.3 MB/s | 224 kB 00:00 (57/64): python3-3.12.12-4.el10_1.x86_64.rpm 5.7 MB/s | 28 kB 00:00 (58/64): policycoreutils-python-utils-3.9-1.el10.noarch.rpm 6.7 MB/s | 51 kB 00:00 (59/64): perl-doc-5.40.2-512.2.el10_0.noarch.rpm 17 MB/s | 4.9 MB 00:00 (60/64): python-unversioned-command-3.12.12-4.el10_1.noarch.rpm 175 kB/s | 11 kB 00:00 (61/64): python3-libselinux-3.9-1.el10.x86_64.rpm 16 MB/s | 200 kB 00:00 (62/64): python3-libsemanage-3.9-1.el10.x86_64.rpm 7.0 MB/s | 81 kB 00:00 (63/64): python3-policycoreutils-3.9-1.el10.noarch.rpm 28 MB/s | 2.2 MB 00:00 (64/64): python3-libs-3.12.12-4.el10_1.x86_64.rpm 31 MB/s | 9.4 MB 00:00 ----------------------------------------------------------------------------------------------------------------------------------- Total 19 MB/s | 26 MB 00:01 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Upgrading : python3-libs-3.12.12-4.el10_1.x86_64 1/76 Upgrading : python-unversioned-command-3.12.12-4.el10_1.noarch 2/76 Upgrading : python3-3.12.12-4.el10_1.x86_64 3/76 Upgrading : libsepol-3.9-1.el10.x86_64 4/76 Upgrading : libselinux-3.9-1.el10.x86_64 5/76 Running scriptlet: libselinux-3.9-1.el10.x86_64 5/76 Installing : perl-version-8:0.99.32-4.el10.x86_64 6/76 Installing : perl-File-Copy-2.41-512.2.el10_0.noarch 7/76 Installing : perl-CPAN-Meta-Requirements-2.143-11.el10.noarch 8/76 Upgrading : libsemanage-3.9-1.el10.x86_64 9/76 Upgrading : python3-libselinux-3.9-1.el10.x86_64 10/76 Installing : perl-Time-HiRes-4:1.9777-511.el10.x86_64 11/76 Installing : perl-JSON-PP-1:4.16-512.el10.noarch 12/76 Installing : perl-File-Compare-1.100.800-512.2.el10_0.noarch 13/76 Installing : perl-ExtUtils-ParseXS-1:3.51-512.el10.noarch 14/76 Installing : efivar-libs-39-3.el10.x86_64 15/76 Upgrading : python3-libsemanage-3.9-1.el10.x86_64 16/76 Installing : perl-ExtUtils-Command-2:7.70-513.el10.noarch 17/76 Installing : perl-ExtUtils-Manifest-1:1.75-511.el10.noarch 18/76 Upgrading : libselinux-utils-3.9-1.el10.x86_64 19/76 Upgrading : policycoreutils-3.9-1.el10.x86_64 20/76 Running scriptlet: policycoreutils-3.9-1.el10.x86_64 20/76 Upgrading : python3-policycoreutils-3.9-1.el10.noarch 21/76 Installing : python3-pyparsing-3.1.1-7.el10.noarch 22/76 Installing : systemtap-sdt-dtrace-5.3-3b.el10.x86_64 23/76 Installing : systemtap-sdt-devel-5.3-3b.el10.x86_64 24/76 Installing : python3-pip-23.3.2-7.el10.noarch 25/76 Installing : rust-toolset-srpm-macros-1.88.0-1.el10.noarch 26/76 Installing : qt6-srpm-macros-6.9.1-1.el10.noarch 27/76 Installing : pyproject-srpm-macros-1.16.2-1.el10.noarch 28/76 Installing : perl-srpm-macros-1-57.el10.noarch 29/76 Installing : perl-lib-0.65-512.2.el10_0.x86_64 30/76 Installing : perl-doc-5.40.2-512.2.el10_0.noarch 31/76 Installing : perl-I18N-Langinfo-0.24-512.2.el10_0.x86_64 32/76 Installing : perl-Encode-Locale-1.05-31.el10.noarch 33/76 Installing : perl-ExtUtils-Constant-0.25-512.2.el10_0.noarch 34/76 Installing : perl-Devel-PPPort-3.72-512.el10.x86_64 35/76 Installing : perl-CPAN-Meta-YAML-0.018-512.el10.noarch 36/76 Installing : perl-CPAN-Meta-2.150010-511.el10.noarch 37/76 Installing : perl-Benchmark-1.25-512.2.el10_0.noarch 38/76 Installing : perl-Test-Harness-1:3.48-512.el10.noarch 39/76 Installing : perl-AutoSplit-5.74-512.2.el10_0.noarch 40/76 Installing : package-notes-srpm-macros-0.5-13.el10.noarch 41/76 Installing : openblas-srpm-macros-2-19.el10.noarch 42/76 Installing : ocaml-srpm-macros-10-4.el10.noarch 43/76 Installing : lua-srpm-macros-1-15.el10.noarch 44/76 Installing : kernel-srpm-macros-1.0-26.el10.noarch 45/76 Installing : gcc-plugin-annobin-14.3.1-2.1.el10.x86_64 46/76 Installing : efi-srpm-macros-6-7.el10.rocky.0.1.noarch 47/76 Installing : dwz-0.16-1.el10.x86_64 48/76 Installing : annobin-docs-12.99-1.el10.noarch 49/76 Installing : annobin-plugin-gcc-12.99-1.el10.x86_64 50/76 Installing : fonts-srpm-macros-1:2.0.5-18.el10.noarch 51/76 Installing : forge-srpm-macros-0.4.0-6.el10.noarch 52/76 Installing : go-srpm-macros-3.6.0-7.el10_1.noarch 53/76 Installing : python-srpm-macros-3.12-10.el10.noarch 54/76 Installing : redhat-rpm-config-293-1.el10.rocky.0.2.noarch 55/76 Running scriptlet: redhat-rpm-config-293-1.el10.rocky.0.2.noarch 55/76 Installing : perl-ExtUtils-Install-2.22-511.el10.noarch 56/76 Installing : perl-devel-4:5.40.2-512.2.el10_0.x86_64 57/76 Installing : perl-ExtUtils-MakeMaker-2:7.70-513.el10.noarch 58/76 Installing : efi-filesystem-6-7.el10.rocky.0.1.noarch 59/76 Installing : efibootmgr-18-8.el10.x86_64 60/76 Installing : python3-devel-3.12.12-4.el10_1.x86_64 61/76 Upgrading : policycoreutils-python-utils-3.9-1.el10.noarch 62/76 Installing : mokutil-2:0.7.2-1.el10.x86_64 63/76 Installing : patch-2.7.6-26.el10.x86_64 64/76 Cleanup : policycoreutils-python-utils-3.8-1.el10.noarch 65/76 Cleanup : python3-policycoreutils-3.8-1.el10.noarch 66/76 Running scriptlet: policycoreutils-3.8-1.el10.x86_64 67/76 Cleanup : policycoreutils-3.8-1.el10.x86_64 67/76 Cleanup : python3-libsemanage-3.8.1-1.el10_0.x86_64 68/76 Cleanup : libsemanage-3.8.1-1.el10_0.x86_64 69/76 Cleanup : python3-libselinux-3.8-2.el10_0.x86_64 70/76 Cleanup : libselinux-utils-3.8-2.el10_0.x86_64 71/76 Cleanup : python3-3.12.9-2.el10_0.2.x86_64 72/76 Cleanup : libselinux-3.8-2.el10_0.x86_64 73/76 Cleanup : python-unversioned-command-3.12.9-2.el10_0.2.noarch 74/76 Cleanup : libsepol-3.8-1.el10.x86_64 75/76 Cleanup : python3-libs-3.12.9-2.el10_0.2.x86_64 76/76 Running scriptlet: python3-libs-3.12.9-2.el10_0.2.x86_64 76/76 Upgraded: libselinux-3.9-1.el10.x86_64 libselinux-utils-3.9-1.el10.x86_64 libsemanage-3.9-1.el10.x86_64 libsepol-3.9-1.el10.x86_64 policycoreutils-3.9-1.el10.x86_64 policycoreutils-python-utils-3.9-1.el10.noarch python-unversioned-command-3.12.12-4.el10_1.noarch python3-3.12.12-4.el10_1.x86_64 python3-libs-3.12.12-4.el10_1.x86_64 python3-libselinux-3.9-1.el10.x86_64 python3-libsemanage-3.9-1.el10.x86_64 python3-policycoreutils-3.9-1.el10.noarch Installed: annobin-docs-12.99-1.el10.noarch annobin-plugin-gcc-12.99-1.el10.x86_64 dwz-0.16-1.el10.x86_64 efi-filesystem-6-7.el10.rocky.0.1.noarch efi-srpm-macros-6-7.el10.rocky.0.1.noarch efibootmgr-18-8.el10.x86_64 efivar-libs-39-3.el10.x86_64 fonts-srpm-macros-1:2.0.5-18.el10.noarch forge-srpm-macros-0.4.0-6.el10.noarch gcc-plugin-annobin-14.3.1-2.1.el10.x86_64 go-srpm-macros-3.6.0-7.el10_1.noarch kernel-srpm-macros-1.0-26.el10.noarch lua-srpm-macros-1-15.el10.noarch mokutil-2:0.7.2-1.el10.x86_64 ocaml-srpm-macros-10-4.el10.noarch openblas-srpm-macros-2-19.el10.noarch package-notes-srpm-macros-0.5-13.el10.noarch patch-2.7.6-26.el10.x86_64 perl-AutoSplit-5.74-512.2.el10_0.noarch perl-Benchmark-1.25-512.2.el10_0.noarch perl-CPAN-Meta-2.150010-511.el10.noarch perl-CPAN-Meta-Requirements-2.143-11.el10.noarch perl-CPAN-Meta-YAML-0.018-512.el10.noarch perl-Devel-PPPort-3.72-512.el10.x86_64 perl-Encode-Locale-1.05-31.el10.noarch perl-ExtUtils-Command-2:7.70-513.el10.noarch perl-ExtUtils-Constant-0.25-512.2.el10_0.noarch perl-ExtUtils-Install-2.22-511.el10.noarch perl-ExtUtils-MakeMaker-2:7.70-513.el10.noarch perl-ExtUtils-Manifest-1:1.75-511.el10.noarch perl-ExtUtils-ParseXS-1:3.51-512.el10.noarch perl-File-Compare-1.100.800-512.2.el10_0.noarch perl-File-Copy-2.41-512.2.el10_0.noarch perl-I18N-Langinfo-0.24-512.2.el10_0.x86_64 perl-JSON-PP-1:4.16-512.el10.noarch perl-Test-Harness-1:3.48-512.el10.noarch perl-Time-HiRes-4:1.9777-511.el10.x86_64 perl-devel-4:5.40.2-512.2.el10_0.x86_64 perl-doc-5.40.2-512.2.el10_0.noarch perl-lib-0.65-512.2.el10_0.x86_64 perl-srpm-macros-1-57.el10.noarch perl-version-8:0.99.32-4.el10.x86_64 pyproject-srpm-macros-1.16.2-1.el10.noarch python-srpm-macros-3.12-10.el10.noarch python3-devel-3.12.12-4.el10_1.x86_64 python3-pip-23.3.2-7.el10.noarch python3-pyparsing-3.1.1-7.el10.noarch qt6-srpm-macros-6.9.1-1.el10.noarch redhat-rpm-config-293-1.el10.rocky.0.2.noarch rust-toolset-srpm-macros-1.88.0-1.el10.noarch systemtap-sdt-devel-5.3-3b.el10.x86_64 systemtap-sdt-dtrace-5.3-3b.el10.x86_64 Complete! OS package installations finished OS package installations finished + Installing ONTAP Mediator. (Log: /root/ontap_mediator.pJBcIv/ontap-mediator-1.12.1/ontap-mediator-1.12.1/install_20260324151410.log) This step will take several minutes. Use the log file to view progress. Sudoer config verified ONTAP Mediator rsyslog and logging rotation enabled + Install successful. (Moving log to /opt/netapp/lib/ontap_mediator/log/install_20260324151410.log) + WARNING: This system supports UEFI Secure Boot (SB) is currently disabled on this system. If SB is enabled in the future, SCST will not work unless the following action is taken: Using the keys in /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys follow instructions in /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/README.module-signing to sign the SCST kernel module. Note that reboot will be needed. SCST will not start automatically when Secure Boot is enabled and not configured properly. + Note: ONTAP Mediator generated a self-signed server certificate for temporary use on this host. If the DNS name or IP address for the host is changed, the certificate will no longer be valid. The default certificates should be replaced with secure trusted certificates signed by a known certificate authority prior to use for production. For more information, see /opt/netapp/lib/ontap_mediator/README + Note: ONTAP Mediator uses a kernel module compiled specifically for the current OS. Using 'yum update' to upgrade the kernel might cause service interruption. For more information, see /opt/netapp/lib/ontap_mediator/README [root@mediator_host ~]#僅支援 HTTPS 的 ONTAP Mediator 安裝範例（主控台輸出）
[root@mediator_host ~]# tar -zxvf ontap-mediator-1.12.1.tgz ontap-mediator-1.12.1/ ontap-mediator-1.12.1/csc-prod-chain-ONTAP-Mediator.pem ontap-mediator-1.12.1/tsa-prod-ONTAP-Mediator.pem ontap-mediator-1.12.1/csc-prod-ONTAP-Mediator.pem ontap-mediator-1.12.1/tsa-prod-chain-ONTAP-Mediator.pem ontap-mediator-1.12.1/ONTAP-Mediator-production.pub ontap-mediator-1.12.1/ontap-mediator-1.12.1 ontap-mediator-1.12.1/ontap-mediator-1.12.1.sig ontap-mediator-1.12.1/ontap-mediator-1.12.1.tsr ontap-mediator-1.12.1/ontap-mediator-1.12.1.sig.tsr [root@mediator_host ~]# ontap-mediator-1.12.1/ontap-mediator-1.12.1 --https-only ONTAP Mediator: Self Extracting Installer + Extracting the ONTAP Mediator installation/upgrade archive + Performing the ONTAP Mediator run-time code signature check Using openssl from the path: /usr/bin/openssl configured for CApath:/etc/pki/tls Error querying OCSP responder 40E72F35407F0000:error:1E800080:HTTP routines:OSSL_HTTP_REQ_CTX_nbio:failed reading data:crypto/http/http_client.c:596: 40E72F35407F0000:error:1E800067:HTTP routines:OSSL_HTTP_REQ_CTX_exchange:error receiving:crypto/http/http_client.c:1045:server=http://ocsp.entrust.net:80 WARNING: The OCSP check failed while attempting to test the Code-Signature-Check certificate Continue without code signature checking (only recommended if integrity has been established manually)? y(es)/N(o): yes SKIPPING: Code signature check, manual override due to lack of OCSP response + Unpacking the ONTAP Mediator installer + ONTAP_MEDIATOR_INSTALL_HTTPS_ONLY is set to '1', args are: '' + Starting ONTAP Mediator install/update process: previous installation_mode is '' + Selected install package mode: HTTPS_ONLY + Checking that required port 31784 is free ONTAP Mediator requires two user accounts. One for the service (netapp), and one for use by ONTAP to the mediator API (mediatoradmin). Would you like to use the default account names: netapp + mediatoradmin? (Y(es)/n(o)): yes Enter ONTAP Mediator user account (mediatoradmin) password: Re-Enter ONTAP Mediator user account (mediatoradmin) password: + Checking if SELinux is in enforcing mode + Checking for default Linux firewall + Installing required packages. Last metadata expiration check: 0:38:52 ago on Mon 20 Apr 2026 11:23:22 AM EDT. Package openssl-1:3.5.1-7.el9_7.x86_64 is already installed. Package openssl-devel-1:3.5.1-7.el9_7.x86_64 is already installed. Package gcc-11.5.0-11.el9.x86_64 is already installed. Package make-1:4.3-8.el9.x86_64 is already installed. Package which-2.21-30.el9_6.x86_64 is already installed. Package libselinux-utils-3.6-3.el9.x86_64 is already installed. Package patch-2.7.6-16.el9.x86_64 is already installed. Package perl-Data-Dumper-2.174-462.el9.x86_64 is already installed. Package perl-ExtUtils-MakeMaker-2:7.60-3.el9.noarch is already installed. Package bzip2-1.0.8-10.el9_5.x86_64 is already installed. Package efibootmgr-16-12.el9.x86_64 is already installed. Package mokutil-2:0.7.2-1.el9.x86_64 is already installed. Package python3-pip-21.3.1-1.el9.noarch is already installed. Package elfutils-libelf-devel-0.193-1.el9.x86_64 is already installed. Package policycoreutils-python-utils-3.6-3.el9.noarch is already installed. Package python3.12-3.12.12-4.el9_7.2.x86_64 is already installed. Package python3.12-devel-3.12.12-4.el9_7.2.x86_64 is already installed. Dependencies resolved. Nothing to do. Complete! OS package installations finished + Installing ONTAP Mediator. (Log: /root/ontap_mediator.CJqNqu/ontap-mediator-1.12.1/ontap-mediator-1.12.1/install_20260420120204.log) This step will take several minutes. Use the log file to view progress. Sudoer config verified ONTAP Mediator rsyslog and logging rotation enabled + Install successful. (Moving log to /opt/netapp/lib/ontap_mediator/log/install_20260420120204.log) + Note: ONTAP Mediator generated a self-signed server certificate for temporary use on this host. If the DNS name or IP address for the host is changed, the certificate will no longer be valid. The default certificates should be replaced with secure trusted certificates signed by a known certificate authority prior to use for production. For more information, see /opt/netapp/lib/ontap_mediator/README [root@mediator_host ~]#
註冊 UEFI Secure Boot 的安全性金鑰
從 ONTAP Mediator 1.4 開始，UEFI 系統上啟用了安全啟動機制。啟用安全啟動後，您必須在安裝後執行額外的步驟來註冊安全性金鑰。
|
|
如果您安裝的是僅支援 HTTPS 的 ONTAP Mediator 1.12 或更高版本，則不會安裝 SCST 套件，您可以跳過此工作。 |
步驟
-
請依照 README 檔案中的說明對 SCST 核心模組進行簽署：
/opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/README.module-signing -
找到所需的金鑰：
/opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys
安裝完成後，系統輸出會提供 README 檔案和金鑰位置。 -
將公鑰加入 MOK 清單：
mokutil --import /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/scst_module_key.der
您可以將私鑰保留在預設位置，或將其移至安全的位置。您必須將公鑰保留在現有位置，以便 Boot Manager 可以使用它。如需詳細資訊，請參閱 README.module-signing 檔案：
[root@hostname ~]# ls /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/ README.module-signing scst_module_key.der scst_module_key.priv -
重新開機主機，並使用裝置的 UEFI Boot Manager 核准新的 MOK。您需要為 `mokutil`公用程式在"啟用 UEFI 安全啟動時安裝 ONTAP Mediator"中提供的密碼片語。
簽署 SCST 核心模組
安裝 ONTAP Mediator 後，如果 systemctl status mediator-scst 顯示為失敗（非作用中），請依照下列步驟對 SCST 核心模組進行簽署。
|
|
如果您安裝的是僅支援 HTTPS 的 ONTAP Mediator 1.12 或更高版本，則不會安裝 SCST 套件，您可以跳過此工作。 |
步驟
-
建置過程中會在
/opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/目錄中產生一對公鑰/私鑰。執行以下命令來檢視產生的金鑰：ls /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/README.module-signing scst_module_key.der scst_module_key.priv
-
執行以下命令，開始將公鑰匯入 UEFI 金鑰儲存庫的過程：
mokutil --import /opt/netapp/lib/ontap_mediator/ontap_mediator/SCST_mod_keys/scst_module_key.der`mokutil` 公用程式會提示您輸入兩次密碼。
-
mokutil 軟體在匯入過程中會要求為此金鑰設定一個臨時密碼。
-
使用下列命令驗證匯入程序是否已啟動，然後將系統重新開機。開機載入程式會啟動 EFI MOK 管理程式。
mokutil --list-new -
使用畫面上的選單開啟 SCST 核心模組金鑰。開機後，執行下列命令。服務啟動後，即會簽署 SCST 核心模組。
systemctl status mediator-scst
接下來是什麼？