本繁體中文版使用機器翻譯，譯文僅供參考，若與英文版本牴觸，應以英文版本為準。

修改MetroCluster 位址、網路遮罩和閘道、使其位於一個靜態IP中

貢獻者

從ONTAP 《E59.10.1》開始、您可以變更MetroCluster 下列的EIP介面屬性：IP位址和遮罩、以及閘道。您可以使用任何參數組合來更新。

例如、如果偵測到重複的IP位址、或是因為路由器組態變更而需要變更第3層網路的閘道、您可能需要更新這些內容。

一次只能變更一個介面。在更新其他介面並重新建立連線之前、該介面會造成流量中斷。

使用「MetroCluster 靜態組態設定介面modify」命令來變更MetroCluster 任何的任何靜態IP介面屬性。

附註 這些命令會變更特定連接埠之特定節點的組態。若要還原完整的網路連線能力、其他連接埠也需要類似的命令。同樣地、網路交換器也需要更新其組態。例如、如果閘道已更新、則理想情況下會在HA配對的兩個節點上變更閘道、因為它們相同。此外、連接至這些節點的交換器也需要更新其閘道。

使用「MetroCluster 畫面組態設定介面show」、「MetroCluster 畫面連線」檢查和「MetroCluster 畫面顯示」命令、確認所有連線功能都能在所有介面上運作。

修改IP位址、網路遮罩和閘道

  1. 更新單一節點和介面的IP位址、網路遮罩和閘道：MetroCluster 「修改組態設定介面」

下列命令顯示如何更新IP位址、網路遮罩和閘道：

cluster_A::* metrocluster configuration-settings interface modify -cluster-name cluster_A -home-node node_A_1 -home-port e0a-10 -address 192.168.12.101 -gateway 192.168.12.1 -netmask 255.255.254.0
(metrocluster configuration-settings interface modify)

Warning: This operation will disconnect and reconnect iSCSI and RDMA connections used for DR protection through port “e0a-10”. Partner nodes may need modifications for port “e0a-10” in order to completely establish network connectivity.
Do you want to continue?" yes

[Job 28] Setting up iSCSI target configuration. (pass2:iscsi13:0:-1:0): xpt_action_default: CCB type 0xe XPT_DEV_ADVINFO not supported
[Job 28] Establishing iSCSI initiator connections.
(pass6:iscsi14:0:-1:0): xpt_action_default: CCB type 0xe XPT_DEV_ADVINFO not supported
(pass8:iscsi15:0:-1:0): xpt_action_default: CCB type 0xe XPT_DEV_ADVINFO not supported
(pass9:iscsi16:0:-1:0): xpt_action_default: CCB type 0xe XPT_DEV_ADVINFO not supported
[Job 28] Job succeeded: Interface Modify is successful.

cluster_A::*> metrocluster configuration-settings interface modify -cluster-name cluster_A -home-node node_A_2 -home-port e0a-10 -address 192.168.12.201 -gateway 192.168.12.1 -netmask 255.255.254.0
(metrocluster configuration-settings interface modify)
Warning: This operation will disconnect and reconnect iSCSI and RDMA connections used for DR protection through port “e0a-10”. Partner nodes may need modifications for port “e0a-10” in order to completely establish network connectivity.
Do you want to continue?" yes
[Job 28] Job succeeded: Interface Modify is successful

  1. 確認所有連線功能都適用於所有介面：MetroCluster 「介紹組態設定介面」

下列命令說明如何驗證所有連線功能是否適用於所有介面：

cluster_A::*> metrocluster configuration-settings interface show
(metrocluster configuration-settings interface show)                                                 DR              Config
Group Cluster Node    Network Address Netmask         Gateway         State
----- ------- ------- --------------- --------------- --------------- ---------
1     cluster_A node_A_2
                 Home Port: e0a-10
                      192.168.12.201  255.255.254.0   192.168.12.1    completed
                 Home Port: e0b-20
                      192.168.20.200  255.255.255.0   192.168.20.1    completed
                node_A_1
                 Home Port: e0a-10
                      192.168.12.101  255.255.254.0   192.168.12.1    completed
                 Home Port: e0b-20
                      192.168.20.101  255.255.255.0   192.168.20.1    completed
      cluster_B node_B_1
                 Home Port: e0a-10
                      192.168.11.151  255.255.255.0   192.168.11.1    completed
                 Home Port: e0b-20
                      192.168.21.150  255.255.255.0   192.168.21.1    completed
                node_B_2
                 Home Port: e0a-10
                      192.168.11.250  255.255.255.0   192.168.11.1    completed
                 Home Port: e0b-20
                      192.168.21.250  255.255.255.0   192.168.21.1    completed
8 entries were displayed.

  1. [[step3]確認所有連線都正常運作：MetroCluster 「顯示組態設定連線」

下列命令顯示如何驗證所有連線是否正常運作：

cluster_A::*> metrocluster configuration-settings connection show
  (metrocluster configuration-settings connection show)
DR                    Source          Destination
Group Cluster Node    Network Address Network Address Partner Type Config State
----- ------- ------- --------------- --------------- ------------ ------------
1     cluster_A node_A_2
                 Home Port: e0a-10
                      192.168.10.200  192.168.10.101  HA Partner   completed
                 Home Port: e0a-10
                      192.168.10.200  192.168.11.250  DR Partner   completed
                 Home Port: e0a-10
                      192.168.10.200  192.168.11.151  DR Auxiliary completed
                 Home Port: e0b-20
                      192.168.20.200  192.168.20.100  HA Partner   completed
                 Home Port: e0b-20
                      192.168.20.200  192.168.21.250  DR Partner   completed
                 Home Port: e0b-20
                      192.168.20.200  192.168.21.150  DR Auxiliary completed
                node_A_1
                 Home Port: e0a-10
                      192.168.10.101  192.168.10.200  HA Partner   completed
                 Home Port: e0a-10
                      192.168.10.101  192.168.11.151  DR Partner   completed
                 Home Port: e0a-10
                      192.168.10.101  192.168.11.250  DR Auxiliary completed
                 Home Port: e0b-20
                      192.168.20.100  192.168.20.200  HA Partner   completed
                 Home Port: e0b-20
                      192.168.20.100  192.168.21.150  DR Partner   completed
                 Home Port: e0b-20
                      192.168.20.100  192.168.21.250  DR Auxiliary completed