本繁體中文版使用機器翻譯，譯文僅供參考，若與英文版本牴觸，應以英文版本為準。
線上或離線 MetroCluster IP 介面連接埠
貢獻者
建議變更
PDF
執行維護工作時、您可能需要將 MetroCluster IP 介面連接埠離線或上線。
關於這項工作
"啟用主控台記錄" 在執行此工作之前。
步驟
您可以使用下列步驟將 MetroCluster IP 介面連接埠上線或離線。
-
將權限層級設為進階。
set -privilege advanced-
輸出範例 *
Cluster A_1::> set -privilege advanced Warning: These advanced commands are potentially dangerous; use them only when directed to do so by NetApp personnel. Do you want to continue? {y|n}: y -
-
將 MetroCluster IP 介面連接埠離線。
system ha interconnect link off -node <node_name> -link <link_num, 0 or 1>-
輸出範例 *
Cluster_A1::*> system ha interconnect link off -node node-a1 -link 0
-
驗證 MetroCluster IP 介面是否離線。
Cluster_A1::*> system ha interconnect port show
-
-
輸出範例 *
Cluster_A1::*> system ha interconnect port show Physical Link Link Layer Layer Physical Physical Active Node Monitor Port State State Link Up Link Down Link -------------- ------- ---- -------- --------- -------- --------- ------ node-a1 off 0 disabled down 4 3 false 1 linkup active 4 2 true node-a2 off 0 linkup active 4 2 true 1 linkup active 4 2 true 2 entries were displayed. -
-
將 MetroCluster IP 介面連接埠上線。
system ha interconnect link on -node <node_name> -link <link_num, 0 or 1>-
輸出範例 *
Cluster_A1::*> system ha interconnect link on -node node-a1 -link 0
-
驗證 MetroCluster IP 介面連接埠是否在線上。
Cluster_A1::*> system ha interconnect port show
-
-
輸出範例 *
Cluster_A1::*> system ha interconnect port show Physical Link Link Layer Layer Physical Physical Active Node Monitor Port State State Link Up Link Down Link -------------- ------- ---- -------- --------- -------- --------- ------ node-a1 off 0 linkup active 5 3 true 1 linkup active 4 2 true node-a2 off 0 linkup active 4 2 true 1 linkup active 4 2 true 2 entries were displayed. -