本繁體中文版使用機器翻譯，譯文僅供參考，若與英文版本牴觸，應以英文版本為準。

設定叢集交換器記錄收集功能

叢集交換器健全狀況監控記錄收集功能可用於收集ONTAP 資訊中與交換器相關的記錄檔。您必須確定已使用Bs-53248叢集交換器CLI設定環境、如此處所述。

步驟

  1. 對於更新的版本、請使用下列命令啟用叢集交換器健全狀況監視器記錄收集功能、以收集交換器相關的記錄檔：ONTAP

    「系統交換器乙太網路記錄設定密碼」和「系統交換器乙太網路記錄啟用-收集」

    輸入：「System交換器乙太網路記錄設定密碼」

    cluster1::*> system switch ethernet log setup-password
Enter the switch name: <return>
The switch name entered is not recognized.
Choose from the following list:
cs1
cs2

cluster1::*> system switch ethernet log setup-password

Enter the switch name: cs1
RSA key fingerprint is e5:8b:c6:dc:e2:18:18:09:36:63:d9:63:dd:03:d9:cc
Do you want to continue? {y|n}::[n] y

Enter the password: <enter switch password>
Enter the password again: <enter switch password>

cluster1::*> system switch ethernet log setup-password
Enter the switch name: cs2
RSA key fingerprint is 57:49:86:a1:b9:80:6a:61:9a:86:8e:3c:e3:b7:1f:b1
Do you want to continue? {y|n}:: [n] y

Enter the password: <enter switch password>
Enter the password again: <enter switch password>

    接著是：「系統交換器乙太網路記錄啟用-收集」

    cluster1::*> system switch ethernet log enable-collection

Do you want to enable cluster log collection for all nodes in the cluster?
{y|n}: [n] y

Enabling cluster switch log collection.

cluster1::*>

  2. 如為ONTAP 發行版的更新版本的更新版本、請使用下列命令啟用叢集交換器健全狀況監視器記錄收集功能、以收集交換器相關的記錄檔：

    「系統叢集交換器記錄設定密碼」和「系統叢集交換器記錄啟用收集」

    輸入：「ystem叢集交換器記錄設定密碼」

    cluster1::*> system cluster-switch log setup-password
Enter the switch name: <return>
The switch name entered is not recognized.
Choose from the following list:
cs1
cs2

cluster1::*> system cluster-switch log setup-password

Enter the switch name: cs1
RSA key fingerprint is e5:8b:c6:dc:e2:18:18:09:36:63:d9:63:dd:03:d9:cc
Do you want to continue? {y|n}::[n] y

Enter the password: <enter switch password>
Enter the password again: <enter switch password>

cluster1::*> system cluster-switch log setup-password

Enter the switch name: cs2
RSA key fingerprint is 57:49:86:a1:b9:80:6a:61:9a:86:8e:3c:e3:b7:1f:b1
Do you want to continue? {y|n}:: [n] y

Enter the password: <enter switch password>
Enter the password again: <enter switch password>

    接著是：「系統叢集交換器記錄啟用-收集」

    cluster1::*> system cluster-switch log enable-collection

Do you want to enable cluster log collection for all nodes in the cluster?
{y|n}: [n] y

Enabling cluster switch log collection.
附註 此時無法使用log collect命令。請參閱 "錯誤1225042" 以取得更多詳細資料。
注意 如果這些命令中有任何一個出現錯誤、請聯絡NetApp支援部門。