本繁體中文版使用機器翻譯,譯文僅供參考,若與英文版本牴觸,應以英文版本為準。

如何更換Cisco Nexus 3132Q-V叢集交換器

貢獻者

在叢集網路中更換故障的Cisco Nexus 3132Q-V交換器是不中斷營運的程序(NDO)、您必須執行特定的工作順序。

開始之前
  • 現有的叢集和網路組態必須具備:

    • Nexus 3132Q-V叢集基礎架構必須備援且能在兩台交換器上完全正常運作。

      "Cisco乙太網路交換器" 頁面提供您交換器上最新的RCF和NX-OS版本。

    • 所有叢集連接埠都必須處於「up」狀態。

    • 兩台交換器都必須具備管理連線能力。

    • 所有叢集邏輯介面(lifs)都必須處於「up」(啟動)狀態、而且不得移轉。

  • Nexus 3132Q-V替換交換器:

    • 替換交換器上的管理網路連線功能必須正常運作。

    • 更換交換器的主控台存取必須已就緒。

    • 所需的RCF和NX-OS作業系統映像交換器必須載入至交換器。

    • 交換器的初始自訂必須完成。

此程序將第二個Nexus 31382Q-V叢集交換器CL2取代為全新的31382Q-V交換器C2。本程序中的範例使用下列交換器和節點命名法:

  • N1_clus1是第一個叢集邏輯介面(LIF)、連接至節點n1的叢集交換器C1。

  • N1_clus2是第一個連接至叢集交換器CL2或C2的叢集LIF、適用於節點n1。

  • N1_clus3是連接至叢集交換器C2的第二個LIF、適用於節點n1。

  • N1_clus4是連接至叢集交換器CL1的第二個LIF、適用於節點n1。

  • 10 GbE和40/100 GbE連接埠的數量是在上可用的參考組態檔(RCFs)中定義 "Cisco®叢集網路交換器參考組態檔案下載" 頁面。

  • 節點為n1、n2、n3和n4。本程序中的範例使用四個節點:兩個節點使用四個10 Gb叢集互連連接埠:e0a、e0b、e0c和e0d。其他兩個節點使用兩個40 GB叢集互連連接埠:E4A和e4e。請參閱 "Hardware Universe" 適用於您平台上的實際叢集連接埠。

本程序涵蓋下列案例:

  • 叢集從連接至兩個Nexus 3132Q-V叢集交換器(CL1和CL2)的四個節點開始。

  • 叢集交換器CL2將由C2(步驟1 -21

    • 在每個節點上、連接至CL2的叢集l生命 會移轉至連接至CL1的叢集連接埠。

    • 從CL2上的所有連接埠拔下纜線、然後將纜線重新連接至替換交換器C2上的相同連接埠。

    • 在每個節點上、其移轉的叢集lifs都會還原。

步驟
  1. 如果AutoSupport 此叢集已啟用Section,請叫用AutoSupport 一個消息來抑制自動建立個案:

    「系統節點AutoSupport 不完整地叫用節點*-type all -訊息MAn=xh」

    _x_是維護時段的持續時間(以小時為單位)。

    附註

    此資訊可通知技術支援人員執行此維護工作、以便在維護期間抑制自動建立案例。AutoSupport

  2. 顯示組態中裝置的相關資訊:

    「網路裝置探索秀」

    cluster::> network device-discovery show
                Local  Discovered
    Node        Port   Device              Interface         Platform
    ----------- ------ ------------------- ----------------  ----------------
    n1         /cdp
                e0a    CL1                 Ethernet1/1/1    N3K-C3132Q-V
                e0b    CL2                 Ethernet1/1/1    N3K-C3132Q-V
                e0c    CL2                 Ethernet1/1/2    N3K-C3132Q-V
                e0d    CL1                 Ethernet1/1/2    N3K-C3132Q-V
    n2         /cdp
                e0a    CL1                 Ethernet1/1/3    N3K-C3132Q-V
                e0b    CL2                 Ethernet1/1/3    N3K-C3132Q-V
                e0c    CL2                 Ethernet1/1/4    N3K-C3132Q-V
                e0d    CL1                 Ethernet1/1/4    N3K-C3132Q-V
    n3         /cdp
                e4a    CL1                 Ethernet1/7      N3K-C3132Q-V
                e4e    CL2                 Ethernet1/7      N3K-C3132Q-V
    n4         /cdp
                e4a    CL1                 Ethernet1/8      N3K-C3132Q-V
                e4e    CL2                 Ethernet1/8      N3K-C3132Q-V
    
    12 entries were displayed
  3. 判斷每個叢集介面的管理或作業狀態:

    1. 顯示網路連接埠屬性:

      「網路連接埠展示」

      cluster::*> network port show -role cluster
             (network port show)
      
      Node: n1
                                                                             Ignore
                                                        Speed(Mbps) Health   Health
      Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
      --------- ------------ ---------------- ---- ---- ----------- -------- ------
      e0a       Cluster      Cluster          up   9000 auto/10000  -        -
      e0b       Cluster      Cluster          up   9000 auto/10000  -        -
      e0c       Cluster      Cluster          up   9000 auto/10000  -        -
      e0d       Cluster      Cluster          up   9000 auto/10000  -        -
      
      Node: n2
                                                                             Ignore
                                                        Speed(Mbps) Health   Health
      Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
      --------- ------------ ---------------- ---- ---- ----------- -------- ------
      e0a       Cluster      Cluster          up   9000  auto/10000 -        -
      e0b       Cluster      Cluster          up   9000  auto/10000 -        -
      e0c       Cluster      Cluster          up   9000  auto/10000 -        -
      e0d       Cluster      Cluster          up   9000  auto/10000 -        -
      
      Node: n3
                                                                             Ignore
                                                        Speed(Mbps) Health   Health
      Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
      --------- ------------ ---------------- ---- ---- ----------- -------- ------
      e4a       Cluster      Cluster          up   9000 auto/40000  -        -
      e4e       Cluster      Cluster          up   9000 auto/40000  -        -
      
      Node: n4
                                                                             Ignore
                                                        Speed(Mbps) Health   Health
      Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
      --------- ------------ ---------------- ---- ---- ----------- -------- ------
      e4a       Cluster      Cluster          up   9000 auto/40000  -        -
      e4e       Cluster      Cluster          up   9000 auto/40000  -        -
      12 entries were displayed.
    2. 顯示有關邏輯介面的資訊:

      「網路介面展示」

      cluster::*> network interface show -role cluster
             (network interface show)
      
                   Logical    Status     Network            Current       Current Is
      Vserver     Interface  Admin/Oper Address/Mask       Node          Port    Home
      ----------- ---------- ---------- ------------------ ------------- ------- ----
      Cluster
                  n1_clus1   up/up      10.10.0.1/24       n1            e0a     true
                  n1_clus2   up/up      10.10.0.2/24       n1            e0b     true
                  n1_clus3   up/up      10.10.0.3/24       n1            e0c     true
                  n1_clus4   up/up      10.10.0.4/24       n1            e0d     true
                  n2_clus1   up/up      10.10.0.5/24       n2            e0a     true
                  n2_clus2   up/up      10.10.0.6/24       n2            e0b     true
                  n2_clus3   up/up      10.10.0.7/24       n2            e0c     true
                  n2_clus4   up/up      10.10.0.8/24       n2            e0d     true
                  n3_clus1   up/up      10.10.0.9/24       n3            e0a     true
                  n3_clus2   up/up      10.10.0.10/24      n3            e0e     true
                  n4_clus1   up/up      10.10.0.11/24      n4            e0a     true
                  n4_clus2   up/up      10.10.0.12/24      n4            e0e     true
      
      12 entries were displayed.
    3. 顯示探索到的叢集交換器資訊:

      「系統叢集交換器顯示」

    cluster::> system cluster-switch show
    
    Switch                      Type               Address          Model
    --------------------------- ------------------ ---------------- ---------------
    CL1                          cluster-network   10.10.1.101      NX3132V
         Serial Number: FOX000001
          Is Monitored: true
                Reason:
      Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                        7.0(3)I4(1)
        Version Source: CDP
    
    CL2                          cluster-network   10.10.1.102      NX3132V
         Serial Number: FOX000002
          Is Monitored: true
                Reason:
      Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                        7.0(3)I4(1)
        Version Source: CDP
    
    2 entries were displayed.
  4. 根據您的需求、確認新的Nexus 3132Q-V交換器上已安裝適當的RCF和映像、並進行任何必要的站台自訂。

    此時您必須準備更換交換器。如果您需要升級RCF和映像、則必須執行下列步驟:

    1. 在NetApp支援網站上、前往 "Cisco乙太網路交換器" 頁面。

    2. 請在該頁的表格中記下您的交換器和所需的軟體版本。

    3. 下載適當版本的RCF。

    4. 按一下「說明」頁面上的「繼續」、接受授權合約、然後依照「下載」頁面上的指示下載RCF。

    5. 下載適當版本的映像軟體。

  5. 移轉連接至交換器C2之叢集連接埠的相關生命量:

    網路介面移轉

    此範例顯示LIF移轉是在所有節點上完成:

    cluster::*> network interface migrate -vserver Cluster -lif n1_clus2 -source-node n1 –destination-node n1 -destination-port e0a
    cluster::*> network interface migrate -vserver Cluster -lif n1_clus3 -source-node n1 –destination-node n1 -destination-port e0d
    cluster::*> network interface migrate -vserver Cluster -lif n2_clus2 -source-node n2 –destination-node n2 -destination-port e0a
    cluster::*> network interface migrate -vserver Cluster -lif n2_clus3 -source-node n2 –destination-node n2 -destination-port e0d
    cluster::*> network interface migrate -vserver Cluster -lif n3_clus2 -source-node n3 –destination-node n3 -destination-port e4a
    cluster::*> network interface migrate -vserver Cluster -lif n4_clus2 -source-node n4 –destination-node n4 -destination-port e4a
  6. 驗證叢集的健全狀況:

    「網路介面展示」

    cluster::*> network interface show -role cluster
           (network interface show)
    
                Logical    Status     Network            Current       Current Is
    Vserver     Interface  Admin/Oper Address/Mask       Node          Port    Home
    ----------- ---------- ---------- ------------------ ------------- ------- ----
    Cluster
                n1_clus1   up/up      10.10.0.1/24       n1            e0a     true
                n1_clus2   up/up      10.10.0.2/24       n1            e0a     false
                n1_clus3   up/up      10.10.0.3/24       n1            e0d     false
                n1_clus4   up/up      10.10.0.4/24       n1            e0d     true
                n2_clus1   up/up      10.10.0.5/24       n2            e0a     true
                n2_clus2   up/up      10.10.0.6/24       n2            e0a     false
                n2_clus3   up/up      10.10.0.7/24       n2            e0d     false
                n2_clus4   up/up      10.10.0.8/24       n2            e0d     true
                n3_clus1   up/up      10.10.0.9/24       n3            e4a     true
                n3_clus2   up/up      10.10.0.10/24      n3            e4a     false
                n4_clus1   up/up      10.10.0.11/24      n4            e4a     true
                n4_clus2   up/up      10.10.0.12/24      n4            e4a     false
    12 entries were displayed.
  7. 關閉實體連接至交換器CL2的叢集互連連接埠:

    網路連接埠修改

    此範例顯示所有節點上要關閉的指定連接埠:

    cluster::*> network port modify -node n1 -port e0b -up-admin false
    cluster::*> network port modify -node n1 -port e0c -up-admin false
    cluster::*> network port modify -node n2 -port e0b -up-admin false
    cluster::*> network port modify -node n2 -port e0c -up-admin false
    cluster::*> network port modify -node n3 -port e4e -up-admin false
    cluster::*> network port modify -node n4 -port e4e -up-admin false
  8. Ping遠端叢集介面並執行RPC伺服器檢查:

    「叢集ping叢集」

    cluster::*> cluster ping-cluster -node n1
    Host is n1
    Getting addresses from network interface table...
    Cluster n1_clus1 n1		e0a	10.10.0.1
    Cluster n1_clus2 n1		e0b	10.10.0.2
    Cluster n1_clus3 n1		e0c	10.10.0.3
    Cluster n1_clus4 n1		e0d	10.10.0.4
    Cluster n2_clus1 n2		e0a	10.10.0.5
    Cluster n2_clus2 n2		e0b	10.10.0.6
    Cluster n2_clus3 n2		e0c	10.10.0.7
    Cluster n2_clus4 n2		e0d	10.10.0.8
    Cluster n3_clus1 n4		e0a	10.10.0.9
    Cluster n3_clus2 n3		e0e	10.10.0.10
    Cluster n4_clus1 n4		e0a	10.10.0.11
    Cluster n4_clus2 n4		e0e	10.10.0.12
    
    Local = 10.10.0.1 10.10.0.2 10.10.0.3 10.10.0.4
    Remote = 10.10.0.5 10.10.0.6 10.10.0.7 10.10.0.8 10.10.0.9 10.10.0.10 10.10.0.11 10.10.0.12
    Cluster Vserver Id = 4294967293
    Ping status:
    ....
    Basic connectivity succeeds on 32 path(s)
    Basic connectivity fails on 0 path(s)
    ................
    Detected 1500 byte MTU on 32 path(s):
        Local 10.10.0.1 to Remote 10.10.0.5
        Local 10.10.0.1 to Remote 10.10.0.6
        Local 10.10.0.1 to Remote 10.10.0.7
        Local 10.10.0.1 to Remote 10.10.0.8
        Local 10.10.0.1 to Remote 10.10.0.9
        Local 10.10.0.1 to Remote 10.10.0.10
        Local 10.10.0.1 to Remote 10.10.0.11
        Local 10.10.0.1 to Remote 10.10.0.12
        Local 10.10.0.2 to Remote 10.10.0.5
        Local 10.10.0.2 to Remote 10.10.0.6
        Local 10.10.0.2 to Remote 10.10.0.7
        Local 10.10.0.2 to Remote 10.10.0.8
        Local 10.10.0.2 to Remote 10.10.0.9
        Local 10.10.0.2 to Remote 10.10.0.10
        Local 10.10.0.2 to Remote 10.10.0.11
        Local 10.10.0.2 to Remote 10.10.0.12
        Local 10.10.0.3 to Remote 10.10.0.5
        Local 10.10.0.3 to Remote 10.10.0.6
        Local 10.10.0.3 to Remote 10.10.0.7
        Local 10.10.0.3 to Remote 10.10.0.8
        Local 10.10.0.3 to Remote 10.10.0.9
        Local 10.10.0.3 to Remote 10.10.0.10
        Local 10.10.0.3 to Remote 10.10.0.11
        Local 10.10.0.3 to Remote 10.10.0.12
        Local 10.10.0.4 to Remote 10.10.0.5
        Local 10.10.0.4 to Remote 10.10.0.6
        Local 10.10.0.4 to Remote 10.10.0.7
        Local 10.10.0.4 to Remote 10.10.0.8
        Local 10.10.0.4 to Remote 10.10.0.9
        Local 10.10.0.4 to Remote 10.10.0.10
        Local 10.10.0.4 to Remote 10.10.0.11
        Local 10.10.0.4 to Remote 10.10.0.12
    
    Larger than PMTU communication succeeds on 32 path(s)
    RPC status:
    8 paths up, 0 paths down (tcp check)
    8 paths up, 0 paths down (udp check)
  9. 關閉CL1上的連接埠1/31和1/32、以及作用中的Nexus 3132Q-V交換器:

    「關機」

    此範例顯示交換器CL1上的ISL連接埠1/31和1/32正在關機:

    (CL1)# configure
    (CL1)(Config)# interface e1/31-32
    (CL1(config-if-range)# shutdown
    (CL1(config-if-range)# exit
    (CL1)(Config)# exit
    (CL1)#
  10. 拔下連接至Nexus 3132Q-V交換器CL2的所有纜線、然後將其重新連接至所有節點上的交換器C2。

  11. 從CL2上的E1/31和E1/32連接埠拔下ISL纜線、然後重新連接至替換交換器C2上的相同連接埠。

  12. 在Nexus 3132Q-V交換器CL1上啟動ISL連接埠1/31和1/32。

    (CL1)# configure
    (CL1)(Config)# interface e1/31-32
    (CL1(config-if-range)# no shutdown
    (CL1(config-if-range)# exit
    (CL1)(Config)# exit
    (CL1)#
  13. 確認ISL在CL1上正常運作:

    「How port-channel」

    連接埠eth1/31和eth1/32應顯示「(P)」、這表示ISL連接埠在連接埠通道上。

    CL1# show port-channel summary
    Flags: D - Down         P - Up in port-channel (members)
           I - Individual   H - Hot-standby (LACP only)
           s - Suspended    r - Module-removed
           S - Switched     R - Routed
           U - Up (port-channel)
           M - Not in use. Min-links not met
    --------------------------------------------------------------------------------
    Group Port-        Type   Protocol  Member 						Ports
          Channel
    --------------------------------------------------------------------------------
    1     Po1(SU)      Eth    LACP      Eth1/31(P)   Eth1/32(P)
  14. 確認C2上的ISL正常運作:

    「How port-channel Summary」

    連接埠eth1/31和eth1/32應顯示「(P)」、這表示兩個ISL連接埠都在連接埠通道中。

    C2# show port-channel summary
    Flags: D - Down         P - Up in port-channel (members)
           I - Individual   H - Hot-standby (LACP only)
           s - Suspended    r - Module-removed
           S - Switched     R - Routed
           U - Up (port-channel)
           M - Not in use. Min-links not met
    --------------------------------------------------------------------------------
    Group Port-        Type   Protocol  Member Ports
          Channel
    --------------------------------------------------------------------------------
    1     Po1(SU)      Eth    LACP      Eth1/31(P)   Eth1/32(P)
  15. 在所有節點上、開啟連接至Nexus 3132Q-V交換器C2的所有叢集互連連接埠:「網路連接埠修改」

    cluster::*> network port modify -node n1 -port e0b -up-admin true
    cluster::*> network port modify -node n1 -port e0c -up-admin true
    cluster::*> network port modify -node n2 -port e0b -up-admin true
    cluster::*> network port modify -node n2 -port e0c -up-admin true
    cluster::*> network port modify -node n3 -port e4e -up-admin true
    cluster::*> network port modify -node n4 -port e4e -up-admin true
  16. 對於所有節點、請回復所有移轉的叢集互連lifs:

    網路介面回復

    cluster::*> network interface revert -vserver Cluster -lif n1_clus2
    cluster::*> network interface revert -vserver Cluster -lif n1_clus3
    cluster::*> network interface revert -vserver Cluster -lif n2_clus2
    cluster::*> network interface revert -vserver Cluster -lif n2_clus3
    Cluster::*> network interface revert –vserver Cluster –lif n3_clus2
    Cluster::*> network interface revert –vserver Cluster –lif n4_clus2
  17. 確認叢集互連連接埠現在已還原至其主目錄:

    「網路介面展示」

    此範例顯示所有的生命週期都已成功還原、因為「目前連接埠」欄下所列的連接埠在「is Home」欄位中的狀態為「true」。如果「is Home」欄位值為「假」、則LIF尚未還原。

    cluster::*> network interface show -role cluster
     (network interface show)
                Logical    Status     Network            Current       Current Is
    Vserver     Interface  Admin/Oper Address/Mask       Node          Port    Home
    ----------- ---------- ---------- ------------------ ------------- ------- ----
    Cluster
                n1_clus1   up/up      10.10.0.1/24       n1            e0a     true
                n1_clus2   up/up      10.10.0.2/24       n1            e0b     true
                n1_clus3   up/up      10.10.0.3/24       n1            e0c     true
                n1_clus4   up/up      10.10.0.4/24       n1            e0d     true
                n2_clus1   up/up      10.10.0.5/24       n2            e0a     true
                n2_clus2   up/up      10.10.0.6/24       n2            e0b     true
                n2_clus3   up/up      10.10.0.7/24       n2            e0c     true
                n2_clus4   up/up      10.10.0.8/24       n2            e0d     true
                n3_clus1   up/up      10.10.0.9/24       n3            e4a     true
                n3_clus2   up/up      10.10.0.10/24      n3            e4e     true
                n4_clus1   up/up      10.10.0.11/24      n4            e4a     true
                n4_clus2   up/up      10.10.0.12/24      n4            e4e     true
    12 entries were displayed.
  18. 驗證是否已連接叢集連接埠:

    「網路連接埠展示」

    cluster::*> network port show –role cluster
      (network port show)
    Node: n1
                                                                           Ignore
                                                      Speed(Mbps) Health   Health
    Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
    --------- ------------ ---------------- ---- ---- ----------- -------- ------
    e0a       Cluster      Cluster          up   9000 auto/10000  -        -
    e0b       Cluster      Cluster          up   9000 auto/10000  -        -
    e0c       Cluster      Cluster          up   9000 auto/10000  -        -
    e0d       Cluster      Cluster          up   9000 auto/10000  -        -
    
    Node: n2
                                                                           Ignore
                                                      Speed(Mbps) Health   Health
    Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
    --------- ------------ ---------------- ---- ---- ----------- -------- ------
    e0a       Cluster      Cluster          up   9000  auto/10000 -        -
    e0b       Cluster      Cluster          up   9000  auto/10000 -        -
    e0c       Cluster      Cluster          up   9000  auto/10000 -        -
    e0d       Cluster      Cluster          up   9000  auto/10000 -        -
    
    Node: n3
                                                                           Ignore
                                                      Speed(Mbps) Health   Health
    Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
    --------- ------------ ---------------- ---- ---- ----------- -------- ------
    e4a       Cluster      Cluster          up   9000 auto/40000  -        -
    e4e       Cluster      Cluster          up   9000 auto/40000  -        -
    
    Node: n4
                                                                           Ignore
                                                      Speed(Mbps) Health   Health
    Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
    --------- ------------ ---------------- ---- ---- ----------- -------- ------
    e4a       Cluster      Cluster          up   9000 auto/40000  -        -
    e4e       Cluster      Cluster          up   9000 auto/40000  -        -
    12 entries were displayed.
  19. Ping遠端叢集介面並執行RPC伺服器檢查:

    「叢集ping叢集」

    cluster::*> cluster ping-cluster -node n1
    Host is n1
    Getting addresses from network interface table...
    Cluster n1_clus1 n1		e0a	10.10.0.1
    Cluster n1_clus2 n1		e0b	10.10.0.2
    Cluster n1_clus3 n1		e0c	10.10.0.3
    Cluster n1_clus4 n1		e0d	10.10.0.4
    Cluster n2_clus1 n2		e0a	10.10.0.5
    Cluster n2_clus2 n2		e0b	10.10.0.6
    Cluster n2_clus3 n2		e0c	10.10.0.7
    Cluster n2_clus4 n2		e0d	10.10.0.8
    Cluster n3_clus1 n3		e0a	10.10.0.9
    Cluster n3_clus2 n3		e0e	10.10.0.10
    Cluster n4_clus1 n4		e0a	10.10.0.11
    Cluster n4_clus2 n4		e0e	10.10.0.12
    
    Local = 10.10.0.1 10.10.0.2 10.10.0.3 10.10.0.4
    Remote = 10.10.0.5 10.10.0.6 10.10.0.7 10.10.0.8 10.10.0.9 10.10.0.10 10.10.0.11 10.10.0.12
    Cluster Vserver Id = 4294967293
    Ping status:
    ....
    Basic connectivity succeeds on 32 path(s)
    Basic connectivity fails on 0 path(s)
    ................
    Detected 1500 byte MTU on 32 path(s):
        Local 10.10.0.1 to Remote 10.10.0.5
        Local 10.10.0.1 to Remote 10.10.0.6
        Local 10.10.0.1 to Remote 10.10.0.7
        Local 10.10.0.1 to Remote 10.10.0.8
        Local 10.10.0.1 to Remote 10.10.0.9
        Local 10.10.0.1 to Remote 10.10.0.10
        Local 10.10.0.1 to Remote 10.10.0.11
        Local 10.10.0.1 to Remote 10.10.0.12
        Local 10.10.0.2 to Remote 10.10.0.5
        Local 10.10.0.2 to Remote 10.10.0.6
        Local 10.10.0.2 to Remote 10.10.0.7
        Local 10.10.0.2 to Remote 10.10.0.8
        Local 10.10.0.2 to Remote 10.10.0.9
        Local 10.10.0.2 to Remote 10.10.0.10
        Local 10.10.0.2 to Remote 10.10.0.11
        Local 10.10.0.2 to Remote 10.10.0.12
        Local 10.10.0.3 to Remote 10.10.0.5
        Local 10.10.0.3 to Remote 10.10.0.6
        Local 10.10.0.3 to Remote 10.10.0.7
        Local 10.10.0.3 to Remote 10.10.0.8
        Local 10.10.0.3 to Remote 10.10.0.9
        Local 10.10.0.3 to Remote 10.10.0.10
        Local 10.10.0.3 to Remote 10.10.0.11
        Local 10.10.0.3 to Remote 10.10.0.12
        Local 10.10.0.4 to Remote 10.10.0.5
        Local 10.10.0.4 to Remote 10.10.0.6
        Local 10.10.0.4 to Remote 10.10.0.7
        Local 10.10.0.4 to Remote 10.10.0.8
        Local 10.10.0.4 to Remote 10.10.0.9
        Local 10.10.0.4 to Remote 10.10.0.10
        Local 10.10.0.4 to Remote 10.10.0.11
        Local 10.10.0.4 to Remote 10.10.0.12
    
    Larger than PMTU communication succeeds on 32 path(s)
    RPC status:
    8 paths up, 0 paths down (tcp check)
    8 paths up, 0 paths down (udp check)
  20. 顯示組態中裝置的相關資訊:

    • 「網路裝置探索秀」

    • 「網路連接埠show -role cluster」

    • 「網路介面show -role cluster」

    • 「系統叢集交換器顯示」

      cluster::> network device-discovery show
                  Local  Discovered
      Node        Port   Device              Interface        Platform
      ----------- ------ ------------------- ---------------- ----------------
      n1         /cdp
                  e0a    C1                 Ethernet1/1/1    N3K-C3132Q-V
                  e0b    C2                 Ethernet1/1/1    N3K-C3132Q-V
                  e0c    C2                 Ethernet1/1/2    N3K-C3132Q-V
                  e0d    C1                 Ethernet1/1/2    N3K-C3132Q-V
      n2         /cdp
                  e0a    C1                 Ethernet1/1/3    N3K-C3132Q-V
                  e0b    C2                 Ethernet1/1/3    N3K-C3132Q-V
                  e0c    C2                 Ethernet1/1/4    N3K-C3132Q-V
                  e0d    C1                 Ethernet1/1/4    N3K-C3132Q-V
      n3         /cdp
                  e4a    C1                 Ethernet1/7      N3K-C3132Q-V
                  e4e    C2                 Ethernet1/7      N3K-C3132Q-V
      n4         /cdp
                  e4a    C1                 Ethernet1/8      N3K-C3132Q-V
                  e4e    C2                 Ethernet1/8      N3K-C3132Q-V
      12 entries were displayed.
      cluster::*> network port show –role cluster
        (network port show)
      Node: n1
                                                                             Ignore
                                                        Speed(Mbps) Health   Health
      Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
      --------- ------------ ---------------- ---- ---- ----------- -------- ------
      e0a       Cluster      Cluster          up   9000 auto/10000  -        -
      e0b       Cluster      Cluster          up   9000 auto/10000  -        -
      e0c       Cluster      Cluster          up   9000 auto/10000  -        -
      e0d       Cluster      Cluster          up   9000 auto/10000  -        -
      
      Node: n2
                                                                             Ignore
                                                        Speed(Mbps) Health   Health
      Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
      --------- ------------ ---------------- ---- ---- ----------- -------- ------
      e0a       Cluster      Cluster          up   9000  auto/10000 -        -
      e0b       Cluster      Cluster          up   9000  auto/10000 -        -
      e0c       Cluster      Cluster          up   9000  auto/10000 -        -
      e0d       Cluster      Cluster          up   9000  auto/10000 -        -
      
      Node: n3
                                                                             Ignore
                                                        Speed(Mbps) Health   Health
      Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
      --------- ------------ ---------------- ---- ---- ----------- -------- ------
      e4a       Cluster      Cluster          up   9000 auto/40000  -        -
      e4e       Cluster      Cluster          up   9000 auto/40000  -        -
      
      Node: n4
                                                                             Ignore
                                                        Speed(Mbps) Health   Health
      Port      IPspace      Broadcast Domain Link MTU  Admin/Oper  Status   Status
      --------- ------------ ---------------- ---- ---- ----------- -------- ------
      e4a       Cluster      Cluster          up   9000 auto/40000  -        -
      e4e       Cluster      Cluster          up   9000 auto/40000  -        -
      12 entries were displayed.
      cluster::*> network interface show -role cluster
       (network interface show)
                  Logical    Status     Network            Current       Current Is
      Vserver     Interface  Admin/Oper Address/Mask       Node          Port    Home
      ----------- ---------- ---------- ------------------ ------------- ------- ----
      Cluster
                  n1_clus1   up/up      10.10.0.1/24       n1            e0a     true
                  n1_clus2   up/up      10.10.0.2/24       n1            e0b     true
                  n1_clus3   up/up      10.10.0.3/24       n1            e0c     true
                  n1_clus4   up/up      10.10.0.4/24       n1            e0d     true
                  n2_clus1   up/up      10.10.0.5/24       n2            e0a     true
                  n2_clus2   up/up      10.10.0.6/24       n2            e0b     true
                  n2_clus3   up/up      10.10.0.7/24       n2            e0c     true
                  n2_clus4   up/up      10.10.0.8/24       n2            e0d     true
                  n3_clus1   up/up      10.10.0.9/24       n3            e4a     true
                  n3_clus2   up/up      10.10.0.10/24      n3            e4e     true
                  n4_clus1   up/up      10.10.0.11/24      n4            e4a     true
                  n4_clus2   up/up      10.10.0.12/24      n4            e4e     true
      12 entries were displayed.
    cluster::*> system cluster-switch show
    
    Switch                      Type               Address          Model
    --------------------------- ------------------ ---------------- ---------------
    CL1                          cluster-network   10.10.1.101      NX3132V
         Serial Number: FOX000001
          Is Monitored: true
                Reason:
      Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                        7.0(3)I4(1)
        Version Source: CDP
    
    CL2                          cluster-network   10.10.1.102      NX3132V
         Serial Number: FOX000002
          Is Monitored: true
                Reason:
      Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                        7.0(3)I4(1)
        Version Source: CDP
    C2                          cluster-network    10.10.1.103      NX3132V
         Serial Number: FOX000003
          Is Monitored: true
                Reason:
      Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                        7.0(3)I4(1)
        Version Source: CDP
    
    3 entries were displayed.
  21. [[step21_replace31382q]移除已更換的Nexus 3132Q-V交換器(如果尚未自動移除):

    「系統叢集交換器刪除」

    cluster::*> system cluster-switch delete –device CL2
  22. 確認已監控適當的叢集交換器:

    「系統叢集交換器顯示」

    cluster::> system cluster-switch show
    
    Switch                      Type               Address          Model
    --------------------------- ------------------ ---------------- ---------------
    CL1                          cluster-network    10.10.1.101      NX3132V
         Serial Number: FOX000001
          Is Monitored: true
                Reason:
      Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                        7.0(3)I4(1)
        Version Source: CDP
    
    C2                          cluster-network     10.10.1.103      NX3132V
         Serial Number: FOX000002
          Is Monitored: true
                Reason:
      Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                        7.0(3)I4(1)
        Version Source: CDP
    
    2 entries were displayed.
  23. 啟用叢集交換器健全狀況監視器記錄收集功能、以收集交換器相關的記錄檔:

    「系統叢集交換器記錄設定密碼」

    「系統叢集交換器記錄啟用收集」

    cluster::*> system cluster-switch log setup-password
    Enter the switch name: <return>
    The switch name entered is not recognized.
    Choose from the following list:
    C1
    C2
    
    cluster::*> system cluster-switch log setup-password
    
    Enter the switch name: C1
    RSA key fingerprint is e5:8b:c6:dc:e2:18:18:09:36:63:d9:63:dd:03:d9:cc
    Do you want to continue? {y|n}::[n] y
    
    Enter the password: <enter switch password>
    Enter the password again: <enter switch password>
    
    cluster::*> system cluster-switch log setup-password
    
    Enter the switch name: C2
    RSA key fingerprint is 57:49:86:a1:b9:80:6a:61:9a:86:8e:3c:e3:b7:1f:b1
    Do you want to continue? {y|n}:: [n] y
    
    Enter the password: <enter switch password>
    Enter the password again: <enter switch password>
    
    cluster::*> system cluster-switch log enable-collection
    
    Do you want to enable cluster log collection for all nodes in the cluster?
    {y|n}: [n] y
    
    Enabling cluster switch log collection.
    
    cluster::*>
    附註 如果這些命令中有任何一個出現錯誤、請聯絡NetApp支援部門。
  24. 如果您禁止自動建立個案、請叫用AutoSupport 下列訊息來重新啟用:

    「系統節點AutoSupport 不完整地叫用節點*-type all -most MAn=end」

相關資訊