本繁體中文版使用機器翻譯,譯文僅供參考,若與英文版本牴觸,應以英文版本為準。

安裝NX-OS軟體

貢獻者

您可以使用此程序在Nexus 3132Q-V叢集交換器上安裝NX-OS軟體。

步驟
  1. 將叢集交換器連接至管理網路。

  2. 使用「ping」命令來驗證與裝載NX-OS軟體和RCF之伺服器的連線。

    此範例可驗證交換器是否能以IP位址172.19.2.1連至伺服器:

    cs2# ping 172.19.2.1
    Pinging 172.19.2.1 with 0 bytes of data:
    
    Reply From 172.19.2.1: icmp_seq = 0. time= 5910 usec.
  3. 使用下列傳輸協定之一、將NX-OS軟體複製到Nexus 3132Q-V交換器:FTP、TFTP、SFTP或scp。如需Cisco命令的詳細資訊、請參閱中的適當指南 "Cisco Nexus 3000系列NX-OS命令參考資料" 指南:

    本範例顯示使用SFTP將NX-OS軟體複製到Nexus 3132Q-V交換器:

    cs2# copy sftp: bootflash: vrf management
    Enter source filename: /code/nxos.9.3.4.bin
    Enter hostname for the sftp server: 172.19.2.1
    Enter username: user1
    
    Outbound-ReKey for 172.19.2.1:22
    Inbound-ReKey for 172.19.2.1:22
    user1@172.19.2.1's password: xxxxxxxx
    sftp> progress
    Progress meter enabled
    sftp> get   /code/nxos.9.3.4.bin  /bootflash/nxos.9.3.4.bin
    /code/nxos.9.3.4.bin  100% 1261MB   9.3MB/s   02:15
    sftp> exit
    Copy complete, now saving to disk (please wait)...
    Copy complete.
  4. 驗證NX-OS軟體的執行版本:

    cs2# show version
    Cisco Nexus Operating System (NX-OS) Software
    TAC support: http://www.cisco.com/tac
    Copyright (C) 2002-2020, Cisco and/or its affiliates.
    All rights reserved.
    The copyrights to certain works contained in this software are
    owned by other third parties and used and distributed under their own
    licenses, such as open source.  This software is provided "as is," and unless
    otherwise stated, there is no warranty, express or implied, including but not
    limited to warranties of merchantability and fitness for a particular purpose.
    Certain components of this software are licensed under
    the GNU General Public License (GPL) version 2.0 or
    GNU General Public License (GPL) version 3.0  or the GNU
    Lesser General Public License (LGPL) Version 2.1 or
    Lesser General Public License (LGPL) Version 2.0.
    A copy of each such license is available at
    http://www.opensource.org/licenses/gpl-2.0.php and
    http://opensource.org/licenses/gpl-3.0.html and
    http://www.opensource.org/licenses/lgpl-2.1.php and
    http://www.gnu.org/licenses/old-licenses/library.txt.
    
    Software
      BIOS: version 04.25
    NXOS: version 9.3(3)
      BIOS compile time:  01/28/2020
      NXOS image file is: bootflash:///nxos.9.3.3.bin
                      NXOS compile time: 12/22/2019 2:00:00 [12/22/2019 14:00:37]
    
    Hardware
      cisco Nexus 3132QV Chassis (Nexus 9000 Series)
      Intel(R) Core(TM) i3- CPU @ 2.50GHz with 16399900 kB of memory.
      Processor Board ID FOxxxxxxx23
    
      Device name: cs2
      bootflash:   15137792 kB
      usb1:               0 kB (expansion flash)
    
    Kernel uptime is 79 day(s), 10 hour(s), 23 minute(s), 53 second(s)
    
    Last reset at 663500 usecs after Mon Nov  2 10:50:33 2020
      Reason: Reset Requested by CLI command reload
      System version: 9.3(3)
      Service:
    
    plugin
      Core Plugin, Ethernet Plugin
    
    Active Package(s):
    cs2#
  5. 安裝NX-OS映像。

    安裝映像檔會在每次重新開機時載入映像檔。

    cs2# install all nxos bootflash:nxos.9.3.4.bin
    Installer will perform compatibility check first. Please wait.
    Installer is forced disruptive
    
    Verifying image bootflash:/nxos.9.3.4.bin for boot variable "nxos".
    [] 100% -- SUCCESS
    
    Verifying image type.
    [] 100% -- SUCCESS
    
    Preparing "nxos" version info using image bootflash:/nxos.9.3.4.bin.
    [] 100% -- SUCCESS
    
    Preparing "bios" version info using image bootflash:/nxos.9.3.4.bin.
    [] 100% -- SUCCESS
    
    Performing module support checks.
    [] 100% -- SUCCESS
    
    Notifying services about system upgrade.
    [] 100% -- SUCCESS
    
    
    Compatibility check is done:
    Module  bootable          Impact              Install-type  Reason
    ------- ----------------- ------------------- ------------- ------
         1     yes            disruptive          reset         default upgrade is not hitless
    
    
    Images will be upgraded according to following table:
    Module       Image       Running-Version(pri:alt)                New-Version          Upg-Required
    ------------ ----------- --------------------------------------- -------------------- ------------
         1       nxos        9.3(3)                                  9.3(4)               yes
         1       bios        v04.25(01/28/2020):v04.25(10/18/2016)   v04.25(01/28/2020)   no
    
    
    Switch will be reloaded for disruptive upgrade.
    Do you want to continue with the installation (y/n)?  [n] y
    
    Install is in progress, please wait.
    
    Performing runtime checks.
    [] 100% -- SUCCESS
    
    Setting boot variables.
    [] 100% -- SUCCESS
    
    Performing configuration copy.
    [] 100% -- SUCCESS
    
    Module 1: Refreshing compact flash and upgrading bios/loader/bootrom.
    Warning: please do not remove or power off the module at this time.
    [] 100% -- SUCCESS
    
    
    Finishing the upgrade, switch will reboot in 10 seconds.
    cs2#
  6. 在交換器重新開機後、驗證新版本的NX-OS軟體:

    《如何版本》

    cs2# show version
    Cisco Nexus Operating System (NX-OS) Software
    TAC support: http://www.cisco.com/tac
    Copyright (C) 2002-2020, Cisco and/or its affiliates.
    All rights reserved.
    The copyrights to certain works contained in this software are
    owned by other third parties and used and distributed under their own
    licenses, such as open source.  This software is provided "as is," and unless
    otherwise stated, there is no warranty, express or implied, including but not
    limited to warranties of merchantability and fitness for a particular purpose.
    Certain components of this software are licensed under
    the GNU General Public License (GPL) version 2.0 or
    GNU General Public License (GPL) version 3.0  or the GNU
    Lesser General Public License (LGPL) Version 2.1 or
    Lesser General Public License (LGPL) Version 2.0.
    A copy of each such license is available at
    http://www.opensource.org/licenses/gpl-2.0.php and
    http://opensource.org/licenses/gpl-3.0.html and
    http://www.opensource.org/licenses/lgpl-2.1.php and
    http://www.gnu.org/licenses/old-licenses/library.txt.
    
    Software
      BIOS: version 04.25
    NXOS: version 9.3(4)
      BIOS compile time:  05/22/2019
      NXOS image file is: bootflash:///nxos.9.3.4.bin
      NXOS compile time:  4/28/2020 21:00:00 [04/29/2020 06:28:31]
    
    
    Hardware
      cisco Nexus 3132QV Chassis (Nexus 9000 Series)
      Intel(R) Core(TM) i3- CPU @ 2.50GHz with 16399900 kB of memory.
      Processor Board ID FOxxxxxxx23
    
      Device name: cs2
      bootflash:   15137792 kB
      usb1:               0 kB (expansion flash)
    
    Kernel uptime is 79 day(s), 10 hour(s), 23 minute(s), 53 second(s)
    
    Last reset at 663500 usecs after Mon Nov  2 10:50:33 2020
      Reason: Reset Requested by CLI command reload
      System version: 9.3(4)
      Service:
    
    plugin
      Core Plugin, Ethernet Plugin
    
    Active Package(s):
    
    cs2#