View node capacity for creating and deleting FlexClone files and FlexClone LUNs
-
PDF of this doc site
- Cluster administration
-
Volume administration
- Logical storage management with the CLI
-
NAS storage management
- Configure NFS with the CLI
- Manage NFS with the CLI
-
Manage SMB with the CLI
- Manage file access using SMB
- Security and data encryption
-
Data protection and disaster recovery
- Data protection with the CLI
Collection of separate PDF docs
Creating your file...
You can view whether a node has capacity to receive new requests to create and delete FlexClone files and FlexClone LUNs by viewing the split load for the node. If the maximum split load is reached, no new requests are accepted until the split load falls below the maximum.
When the node reaches its maximum split load, an EBUSY
error message is issued in response to create and delete requests. When the split load for the node falls below the maximum, the node accepts requests to create and delete FlexClone files and FlexClone LUNs again.
A node can accept new requests when the Allowable Split Load field displays capacity, and the create request fits in the available capacity.
-
View how much capacity a node has to create and delete FlexClone files and FlexClone LUNs by using the
volume file clone split load show
command.In the following example, the split load is displayed for all of the nodes in cluster1. All nodes in the cluster have capacity to create and delete FlexClone files and FlexClone LUNs as indicated by the Allowable Split Load field:
cluster1::> volume file clone split load show Node Max Current Token Allowable Split Load Split Load Reserved Load Split Load ---------- ---------- ---------- ------------- ---------- node1 15.97TB 0B 100MB 15.97TB node2 15.97TB 0B 100MB 15.97TB 2 entries were displayed.