Skip to main content
NetApp Solutions
Die deutsche Sprachversion wurde als Serviceleistung für Sie durch maschinelle Übersetzung erstellt. Bei eventuellen Unstimmigkeiten hat die englische Sprachversion Vorrang.

Bereitstellen von Microsoft Hyper-V auf NetApp-Speicher: Migrationsskript

Beitragende

Dieser Abschnitt enthält ein PowerShell Skript, das zur Migration mit FlexClone verwendet werden kann.

PowerShell Skript

param (
    [Parameter(Mandatory=$True, HelpMessage="VCenter DNS name or IP Address")]
    [String]$VCENTER,
    [Parameter(Mandatory=$True, HelpMessage="NetApp ONTAP NFS Datastore name")]
    [String]$DATASTORE,
    [Parameter(Mandatory=$True, HelpMessage="VCenter credentials")]
    [System.Management.Automation.PSCredential]$VCENTER_CREDS,
    [Parameter(Mandatory=$True, HelpMessage="The IP Address of the ONTAP Cluster")]
    [String]$ONTAP_CLUSTER,
    [Parameter(Mandatory=$True, HelpMessage="NetApp ONTAP VServer/SVM name")]
    [String]$VSERVER,
    [Parameter(Mandatory=$True, HelpMessage="NetApp ONTAP NSF,SMB Volume name")]
    [String]$ONTAP_VOLUME_NAME,
    [Parameter(Mandatory=$True, HelpMessage="ONTAP NFS/CIFS Volume mount Drive on Hyper-V host")]
    [String]$ONTAP_NETWORK_SHARE_ADDRESS,
    [Parameter(Mandatory=$True, HelpMessage="NetApp ONTAP Volume QTree folder name")]
    [String]$VHDX_QTREE_NAME,
    [Parameter(Mandatory=$True, HelpMessage="The Credential to connect to the ONTAP Cluster")]
    [System.Management.Automation.PSCredential]$ONTAP_CREDS,
    [Parameter(Mandatory=$True, HelpMessage="Hyper-V VM switch name")]
    [String]$HYPERV_VM_SWITCH
)

function main {

    ConnectVCenter

    ConnectONTAP

    GetVMList

    GetVMInfo

    #PowerOffVMs

    CreateOntapVolumeSnapshot

    Shift

    ConfigureVMsOnHyperV
}

function ConnectVCenter {
    Write-Host "------------------------------------------------------------------------------" -ForegroundColor Cyan
    Write-Host "Connecting to vCenter $VCENTER" -ForegroundColor Magenta
    Write-Host "------------------------------------------------------------------------------`n" -ForegroundColor Cyan

    [string]$vmwareModuleName = "VMware.VimAutomation.Core"

    Write-Host "Importing VMware $vmwareModuleName Powershell module"
    if ((Get-Module|Select-Object -ExpandProperty Name) -notcontains $vmwareModuleName) {
        Try {
            Import-Module $vmwareModuleName -ErrorAction Stop
            Write-Host "$vmwareModuleName imported successfully" -ForegroundColor Green
        } Catch {
            Write-Error "Error: $vmwareMdouleName PowerShell module not found"
			break;
        }
    }
    else {
        Write-Host "$vmwareModuleName Powershell module already imported" -ForegroundColor Green
    }

    Write-Host "`nConnecting to vCenter $VCENTER"
    Try {
        $connect = Connect-VIServer -Server $VCENTER -Protocol https -Credential $VCENTER_CREDS -ErrorAction Stop
        Write-Host "Connected to vCenter $VCENTER" -ForegroundColor Green
    } Catch {
        Write-Error "Failed to connect to vCenter $VCENTER. Error : $($_.Exception.Message)"
		break;
    }
}

function ConnectONTAP {
    Write-Host "`n------------------------------------------------------------------------------" -ForegroundColor Cyan
    Write-Host "Connecting to VSerevr $VSERVER at ONTAP Cluster $ONTAP_CLUSTER" -ForegroundColor Magenta
    Write-Host "------------------------------------------------------------------------------`n" -ForegroundColor Cyan

    [string]$ontapModuleName = "NetApp.ONTAP"

    Write-Host "Importing NetApp ONTAP $ontapModuleName Powershell module"
    if ((Get-Module|Select-Object -ExpandProperty Name) -notcontains $ontapModuleName) {
        Try {
            Import-Module $ontapModuleName -ErrorAction Stop
            Write-Host "$ontapModuleName imported successfully" -ForegroundColor Green
        } Catch {
            Write-Error "Error: $vmwareMdouleName PowerShell module not found"
			break;
        }
    }
    else {
        Write-Host "$ontapModuleName Powershell module already imported" -ForegroundColor Green
    }

    Write-Host "`nConnecting to ONTAP Cluster $ONTAP_CLUSTER"
    Try {
        $connect = Connect-NcController -Name $ONTAP_CLUSTER -Credential $ONTAP_CREDS -Vserver $VSERVER
        Write-Host "Connected to ONTAP Cluster $ONTAP_CLUSTER" -ForegroundColor Green
    } Catch {
        Write-Error "Failed to connect to ONTAP Cluster $ONTAP_CLUSTER. Error : $($_.Exception.Message)"
		break;
    }
}

function GetVMList {
    Write-Host "`n------------------------------------------------------------------------------" -ForegroundColor Cyan
    Write-Host "Fetching powered on VMs list with Datastore $DATASTORE" -ForegroundColor Magenta
    Write-Host "------------------------------------------------------------------------------`n" -ForegroundColor Cyan
    try {
        $vmList = VMware.VimAutomation.Core\Get-VM -Datastore $DATASTORE -ErrorAction Stop| Where-Object {$_.PowerState -eq "PoweredOn"} | OUT-GridView -OutputMode Multiple
        #$vmList = Get-VM -Datastore $DATASTORE -ErrorAction Stop| Where-Object {$_.PowerState -eq "PoweredOn"}

        if($vmList) {
            Write-Host "Selected VMs for Shift" -ForegroundColor Green
            $vmList | Format-Table -Property Name
            $Script:VMList = $vmList
        }
        else {
            Throw "No VMs selected"
        }
    }
    catch {
        Write-Error "Failed to get VM List. Error : $($_.Exception.Message)"
        Break;
    }
}

function GetVMInfo {
    Write-Host "------------------------------------------------------------------------------" -ForegroundColor Cyan
    Write-Host "VM Information" -ForegroundColor Magenta
    Write-Host "------------------------------------------------------------------------------" -ForegroundColor Cyan
    $vmObjArray = New-Object System.Collections.ArrayList

    if($VMList) {
        foreach($vm in $VMList) {
            $vmObj = New-Object -TypeName System.Object

            $vmObj | Add-Member -MemberType NoteProperty -Name ID -Value $vm.Id
            $vmObj | Add-Member -MemberType NoteProperty -Name Name -Value $vm.Name
            $vmObj | Add-Member -MemberType NoteProperty -Name NumCpu -Value $vm.NumCpu
            $vmObj | Add-Member -MemberType NoteProperty -Name MemoryGB -Value $vm.MemoryGB
            $vmObj | Add-Member -MemberType NoteProperty -Name Firmware -Value $vm.ExtensionData.Config.Firmware

            $vmDiskInfo = $vm | VMware.VimAutomation.Core\Get-HardDisk

            $vmDiskArray = New-Object System.Collections.ArrayList
            foreach($disk in $vmDiskInfo) {
                $diskObj = New-Object -TypeName System.Object

                $diskObj | Add-Member -MemberType NoteProperty -Name Name -Value $disk.Name

                $fileName = $disk.Filename
                if ($fileName -match '\[(.*?)\]') {
                    $dataStoreName = $Matches[1]
                }

                $parts = $fileName -split " "
                $pathParts = $parts[1] -split "/"
                $folderName = $pathParts[0]
                $fileName = $pathParts[1]

                $diskObj | Add-Member -MemberType NoteProperty -Name DataStore -Value $dataStoreName
                $diskObj | Add-Member -MemberType NoteProperty -Name Folder -Value $folderName
                $diskObj | Add-Member -MemberType NoteProperty -Name Filename -Value $fileName
                $diskObj | Add-Member -MemberType NoteProperty -Name CapacityGB -Value $disk.CapacityGB

                $null = $vmDiskArray.Add($diskObj)
            }

            $vmObj | Add-Member -MemberType NoteProperty -Name PrimaryHardDisk -Value "[$($vmDiskArray[0].DataStore)] $($vmDiskArray[0].Folder)/$($vmDiskArray[0].Filename)"
            $vmObj | Add-Member -MemberType NoteProperty -Name HardDisks -Value $vmDiskArray

            $null = $vmObjArray.Add($vmObj)

            $vmNetworkArray = New-Object System.Collections.ArrayList

            $vm |
            ForEach-Object {
              $VM = $_
              $VM | VMware.VimAutomation.Core\Get-VMGuest | Select-Object -ExpandProperty Nics |
              ForEach-Object {
                $Nic = $_
                foreach ($IP in $Nic.IPAddress)
                {
                  if ($IP.Contains('.'))
                  {
                    $networkObj = New-Object -TypeName System.Object

                    $vlanId = VMware.VimAutomation.Core\Get-VirtualPortGroup | Where-Object {$_.Key -eq $Nic.NetworkName}
                    $networkObj | Add-Member -MemberType NoteProperty -Name VLanID -Value $vlanId
                    $networkObj | Add-Member -MemberType NoteProperty -Name IPv4Address -Value $IP

                    $null = $vmNetworkArray.Add($networkObj)
                  }
                }
              }
            }

            $vmObj | Add-Member -MemberType NoteProperty -Name PrimaryIPv4 -Value $vmNetworkArray[0].IPv4Address
            $vmObj | Add-Member -MemberType NoteProperty -Name PrimaryVLanID -Value $vmNetworkArray.VLanID
            $vmObj | Add-Member -MemberType NoteProperty -Name Networks -Value $vmNetworkArray

            $guest = $vm.Guest
            $parts = $guest -split ":"
            $afterColon = $parts[1]

            $osFullName = $afterColon

            $vmObj | Add-Member -MemberType NoteProperty -Name OSFullName -Value $osFullName
            $vmObj | Add-Member -MemberType NoteProperty -Name GuestID -Value $vm.GuestId
        }
    }

    $vmObjArray | Format-Table -Property ID, Name, NumCpu, MemoryGB, PrimaryHardDisk, PrimaryIPv4, PrimaryVLanID, GuestID, OSFullName, Firmware

    $Script:VMObjList = $vmObjArray
}

function PowerOffVMs {
    Write-Host "`n------------------------------------------------------------------------------" -ForegroundColor Cyan
    Write-Host "Power Off VMs" -ForegroundColor Magenta
    Write-Host "------------------------------------------------------------------------------`n" -ForegroundColor Cyan
    foreach($vm in $VMObjList) {
        try {
            Write-Host "Powering Off VM $($vm.Name) in vCenter $($VCENTER)"
            $null = VMware.VimAutomation.Core\Stop-VM -VM $vm.Name -Confirm:$false -ErrorAction Stop
            Write-Host "Powered Off VM $($vm.Name)" -ForegroundColor Green
        }
        catch {
            Write-Error "Failed to Power Off VM $($vm.Name). Error : $._Exception.Message"
            Break;
        }
        Write-Host "`n"
    }
}

function CreateOntapVolumeSnapshot {
    Write-Host "`n------------------------------------------------------------------------------" -ForegroundColor Cyan
    Write-Host "Taking ONTAP Snapshot for Volume $ONTAP_VOLUME_NAME" -ForegroundColor Magenta
    Write-Host "------------------------------------------------------------------------------`n" -ForegroundColor Cyan

    Try {
        Write-Host "Taking snapshot for Volume $ONTAP_VOLUME_NAME"
        $timestamp = Get-Date -Format "yyyy-MM-dd_HHmmss"
        $snapshot = New-NcSnapshot -VserverContext $VSERVER -Volume $ONTAP_VOLUME_NAME -Snapshot "snap.script-$timestamp"

        if($snapshot) {
            Write-Host "Snapshot ""$($snapshot.Name)"" created for Volume $ONTAP_VOLUME_NAME" -ForegroundColor Green
            $Script:OntapVolumeSnapshot = $snapshot
        }
    } Catch {
        Write-Error "Failed to create snapshot for Volume $ONTAP_VOLUME_NAME. Error : $_.Exception.Message"
        Break;
    }
}

function Shift {
    Write-Host "------------------------------------------------------------------------------" -ForegroundColor Cyan
    Write-Host "VM Shift" -ForegroundColor Magenta
    Write-Host "------------------------------------------------------------------------------`n" -ForegroundColor Cyan

    $Script:HypervVMList = New-Object System.Collections.ArrayList
    foreach($vmObj in $VMObjList) {

        Write-Host "***********************************************"
        Write-Host "Performing VM conversion for $($vmObj.Name)" -ForegroundColor Blue
        Write-Host "***********************************************"

        $hypervVMObj = New-Object -TypeName System.Object

        $directoryName = "/vol/$($ONTAP_VOLUME_NAME)/$($VHDX_QTREE_NAME)/$($vmObj.HardDisks[0].Folder)"

        try {
            Write-Host "Creating Folder ""$directoryName"" for VM $($vmObj.Name)"
            $dir = New-NcDirectory -VserverContext $VSERVER -Path $directoryName -Permission 0777 -Type directory -ErrorAction Stop
            if($dir) {
                Write-Host "Created folder ""$directoryName"" for VM $($vmObj.Name)`n" -ForegroundColor Green
            }
        }
        catch {
            if($_.Exception.Message -eq "[500]: File exists") {
                Write-Warning "Folder ""$directoryName"" already exists!`n"
            }
            Else {
                Write-Error "Failed to create folder ""$directoryName"" for VM $($vmObj.Name). Error : $($_.Exception.Message)"
                Break;
            }
        }

        $vmDiskArray = New-Object System.Collections.ArrayList

        foreach($disk in $vmObj.HardDisks) {
            $vmDiskObj = New-Object -TypeName System.Object
            try {
                Write-Host "`nConverting $($disk.Name)"
                Write-Host "--------------------------------"

                $vmdkPath = "/vol/$($ONTAP_VOLUME_NAME)/$($disk.Folder)/$($disk.Filename)"
                $fileName = $disk.Filename -replace '\.vmdk$', ''
                $vhdxPath = "$($directoryName)/$($fileName).vhdx"

                Write-Host "Converting ""$($disk.Name)"" VMDK path ""$($vmdkPath)"" to VHDX at Path ""$($vhdxPath)"" for VM $($vmObj.Name)"
                $convert = ConvertTo-NcVhdx -SourceVmdk $vmdkPath -DestinationVhdx $vhdxPath  -SnapshotName $OntapVolumeSnapshot -ErrorAction Stop -WarningAction SilentlyContinue
                if($convert) {
                    Write-Host "Successfully converted VM ""$($vmObj.Name)"" VMDK path ""$($vmdkPath)"" to VHDX at Path ""$($vhdxPath)""" -ForegroundColor Green

                    $vmDiskObj | Add-Member -MemberType NoteProperty -Name Name -Value $disk.Name
                    $vmDiskObj | Add-Member -MemberType NoteProperty -Name VHDXPath -Value $vhdxPath

                    $null = $vmDiskArray.Add($vmDiskObj)
                }
            }
            catch {
                Write-Error "Failed to convert ""$($disk.Name)"" VMDK to VHDX for VM $($vmObj.Name). Error : $($_.Exception.Message)"
                Break;
            }
        }

        $hypervVMObj | Add-Member -MemberType NoteProperty -Name Name -Value $vmObj.Name
        $hypervVMObj | Add-Member -MemberType NoteProperty -Name HardDisks -Value $vmDiskArray
        $hypervVMObj | Add-Member -MemberType NoteProperty -Name MemoryGB -Value $vmObj.MemoryGB
        $hypervVMObj | Add-Member -MemberType NoteProperty -Name Firmware -Value $vmObj.Firmware
        $hypervVMObj | Add-Member -MemberType NoteProperty -Name GuestID -Value $vmObj.GuestID



        $null = $HypervVMList.Add($hypervVMObj)
        Write-Host "`n"

    }
}

function ConfigureVMsOnHyperV {
    Write-Host "------------------------------------------------------------------------------" -ForegroundColor Cyan
    Write-Host "Configuring VMs on Hyper-V" -ForegroundColor Magenta
    Write-Host "------------------------------------------------------------------------------`n" -ForegroundColor Cyan

    foreach($vm in $HypervVMList) {
        try {

            # Define the original path
            $originalPath = $vm.HardDisks[0].VHDXPath
            # Replace forward slashes with backslashes
            $windowsPath = $originalPath -replace "/", "\"

            # Replace the initial part of the path with the Windows drive letter
            $windowsPath = $windowsPath -replace "^\\vol\\", "\\$($ONTAP_NETWORK_SHARE_ADDRESS)\"

            $vmGeneration = if ($vm.Firmware -eq "bios") {1} else {2};

            Write-Host "***********************************************"
            Write-Host "Creating VM $($vm.Name)" -ForegroundColor Blue
            Write-Host "***********************************************"
            Write-Host "Creating VM $($vm.Name) with Memory $($vm.MemoryGB)GB, vSwitch $($HYPERV_VM_SWITCH), $($vm.HardDisks[0].Name) ""$($windowsPath)"", Generation $($vmGeneration) on Hyper-V"

            $createVM = Hyper-V\New-VM -Name $vm.Name -VHDPath $windowsPath -SwitchName $HYPERV_VM_SWITCH -MemoryStartupBytes (Invoke-Expression "$($vm.MemoryGB)GB") -Generation $vmGeneration -ErrorAction Stop
            if($createVM) {
                Write-Host "VM $($createVM.Name) created on Hyper-V host`n" -ForegroundColor Green


                $index = 0
                foreach($vmDisk in $vm.HardDisks) {
                    $index++
                    if ($index -eq 1) {
                        continue
                    }

                    Write-Host "`nAttaching $($vmDisk.Name) for VM $($vm.Name)"
                    Write-Host "---------------------------------------------"

                    $originalPath = $vmDisk.VHDXPath

                    # Replace forward slashes with backslashes
                    $windowsPath = $originalPath -replace "/", "\"

                    # Replace the initial part of the path with the Windows drive letter
                    $windowsPath = $windowsPath -replace "^\\vol\\", "\\$($ONTAP_NETWORK_SHARE_ADDRESS)\"

                    try {
                        $attachDisk = Hyper-v\Add-VMHardDiskDrive -VMName $vm.Name -Path $windowsPath -ErrorAction Stop
                        Write-Host "Attached $($vmDisk.Name) ""$($windowsPath)"" to VM $($vm.Name)" -ForegroundColor Green
                    }
                    catch {
                        Write-Error "Failed to attach $($vmDisk.Name) $($windowsPath) to VM $($vm.Name): Error : $($_.Exception.Message)"
                        Break;
                    }
                }

                if($vmGeneration -eq 2 -and $vm.GuestID -like "*rhel*") {
                    try {
                        Write-Host "`nDisabling secure boot"
                        Hyper-V\Set-VMFirmware -VMName $createVM.Name -EnableSecureBoot Off -ErrorAction Stop
                        Write-Host "Secure boot disabled" -ForegroundColor Green
                    }
                    catch {
                        Write-Error "Failed to disable secure boot for VM $($createVM.Name). Error : $($_.Exception.Message)"
                    }
                }

                try {
                    Write-Host "`nStarting VM $($createVM.Name)"
                    Hyper-v\Start-VM -Name $createVM.Name -ErrorAction Stop
                    Write-Host "Started VM $($createVM.Name)`n" -ForegroundColor Green
                }
                catch {
                    Write-Error "Failed to start VM $($createVM.Name). Error : $($_.Exception.Message)"
                    Break;
                }
            }
        }
        catch {
            Write-Error "Failed  to create VM $($vm.Name) on Hyper-V. Error : $($_.Exception.Message)"
            Break;
        }
    }
}

main