La version française est une traduction automatique. La version anglaise prévaut sur la française en cas de divergence.
GetIpmiInfo
Contributeurs
Suggérer des modifications
PDF
Vous pouvez utiliser le GetIpmiInfo méthode permettant d'afficher un rapport détaillé des capteurs (objets) pour les ventilateurs de nœud, les températures d'entrée et de sortie et les alimentations électriques surveillées par le système.
Paramètres
Cette méthode ne requiert aucun paramètre d'entrée.
valeur de retour
Cette méthode a la valeur de retour suivante :
| Nom | Description | Type |
|---|---|---|
capteurs |
Informations détaillées provenant de chaque capteur au sein d'un nœud. |
tableau d'objets JSON |
Exemple de demande
Les requêtes pour cette méthode sont similaires à l'exemple suivant :
{
"method": "GetIpmiInfo",
"params": {},
"id" : 1
}
Exemple de réponse
En raison de la longueur de la réponse renvoyée par cette méthode API, certaines parties de la réponse ont été intentionnellement supprimées de ce document. Sont inclus les éléments d'information matérielle que le système surveille afin de garantir un fonctionnement optimal du nœud.
{
"id": 1,
"result": {
"ipmiInfo": {
"sensors": [
{
"entityID": "7.1 (System Board)",
"sensorID": "0x72",
"sensorName": "SEL",
"sensorType": "Event Logging Disabled",
"uniqueSensorID": "7.1:0x72"
},
{
"assertionsEnabled": [ "General Chassis intrusion" ],
"deassertionsEnabled": [ "General Chassis intrusion" ],
"entityID": "7.1 (System Board)", "sensorID": "0x73",
"sensorName": "Intrusion",
"sensorType": "Physical Security",
"uniqueSensorID": "7.1:0x73"
},
{THIS ENTIRE SECTION IS REPEATED FOR EACH FAN IN THE SYSTEM
"assertionEvents": [],
"assertionsEnabled": [],
"deassertionsEnabled": [],
"entityID": "7.1 (System Board)",
"eventMessageControl": "Per-threshold",
"lowerCritical": "720.000",
"lowerNonCritical": "840.000",
"maximumSensorRange": "Unspecified",
"minimumSensorRange": "Unspecified",
"negativeHysteresis": "600.000",
"nominalReading": "10080.000",
"normalMaximum": "23640.000",
"normalMinimum": "16680.000",
"positiveHysteresis": "600.000",
"readableThresholds": "lcr lnc",
"sensorID": "0x30",
"sensorName": "Fan1A RPM",
"sensorReading": "4440 (+/- 120) RPM",
"sensorType": "Fan",
"settableThresholds": "",
"status": "ok",
"thresholdReadMask": "lcr lnc",
"uniqueSensorID": "7.1:0x30"
},
.
.
.
{THIS ENTIRE SECTION IS REPEATED FOR THE EXHAUST TEMPERATURE OF EACH NODE
"assertionEvents": [],
"assertionsEnabled": [],
"entityID": "7.1 (System Board)",
"eventMessageControl": "Per-threshold",
"lowerCritical": "3.000",
"lowerNonCritical": "8.000",
"maximumSensorRange": "Unspecified",
"minimumSensorRange": "Unspecified",
"negativeHysteresis": "1.000",
"nominalReading": "23.000",
"normalMaximum": "69.000",
"normalMinimum": "11.000",
"positiveHysteresis": "1.000",
"readableThresholds": "lcr lnc unc ucr",
"sensorID": "0x1",
"sensorName": "Exhaust Temp",
"sensorReading": "44 (+/- 1) degrees C",
"sensorType": "Temperature",
"settableThresholds": "",
"status": "ok",
"uniqueSensorID": "7.1:0x1",
"upperCritical": "75.000",
"upperNonCritical": "70.000"
},
{THIS ENTIRE SECTION IS REPEATED FOR THE INLET TEMPERATURE OF EACH NODE
"assertionEvents": [],
"assertionsEnabled": [],
"deassertionsEnabled": [],
"entityID": "7.1 (System Board)",
"eventMessageControl": "Per-threshold",
"lowerCritical": "-7.000",
"lowerNonCritical": "3.000",
"maximumSensorRange": "Unspecified",
"minimumSensorRange": "Unspecified",
"negativeHysteresis": "1.000",
"nominalReading": "23.000",
"normalMaximum": "69.000",
"normalMinimum": "11.000",
"positiveHysteresis": "1.000",
"readableThresholds": "lcr lnc unc ucr",
"sensorID": "0x4",
"sensorName": "Inlet Temp",
"sensorReading": "20 (+/- 1) degrees C",
"sensorType": "Temperature",
"settableThresholds": "lcr lnc unc ucr",
"status": "ok",
"thresholdReadMask": "lcr lnc unc ucr",
"uniqueSensorID": "7.1:0x4",
"upperCritical": "47.000",
"upperNonCritical": "42.000"
},
{THIS ENTIRE SECTION IS REPEATED FOR EACH POWER SUPPLY ON EACH NODE
"assertionEvents": [],
"assertionsEnabled": [],
"entityID": "10.2 (Power Supply)",
"eventMessageControl": "Per-threshold", "maximumSensorRange": "Unspecified",
"minimumSensorRange": "Unspecified",
"negativeHysteresis": "Unspecified",
"nominalReading": "0.000",
"normalMaximum": "0.000",
"positiveHysteresis": "Unspecified",
"readableThresholds": "No Thresholds",
"sensorID": "0x6d",
"sensorName": "Voltage 2",
"sensorReading": "118 (+/- 0) Volts",
"sensorType": "Voltage",
"settableThresholds": "No Thresholds", "status": "ok", "uniqueSensorID": "10.2:0x6d"
},
.
.
.
}
]
}
}
}
Nouveautés depuis la version
9,6